Replacing the light bulbs. | www.GEAppliances.com |
Safety
Remove screw
Cooktop Light/Night Light
On models JVM1850 and JVM1851, replace the
On models JVM1860, JVM1861 and JVM1870 replace the
1
2 Remove the screw at the right edge of the light cover and push on the left edge of the cover to open.
3 Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by either gently turning (for models JVM1850 and JVM1851) or pulling straight out (for models JVM1860, JVM1861 and JVM1870). Replace with the same size and type bulb.
4 Raise the light shield and replace the screw. Connect electrical power to the oven.
Oven Light
Replace the
1
2 Remove the top grille by taking out the screws on top of the grille that hold it in place and sliding the grille to the left (opening the door makes grille removal easier).
3
4
5 Replace the grille and screws. Connect electrical power to the oven.
Instructions
Operating Instructions
Troubleshooting Tips
Consumer Support
35