Murray TM6100X5A manual Assembly Contents of Parts BAG, To Remove the Trimmer from Carton

ASSEMBLY

ASSEMBLY

CONTENTS OF PARTS BAG

1 - Owner’s Manual

1 - Parts Bag

1 - Fuel Stabilizer

(Not shown actual size)

2 Sets - Trimmer Lines 1 - T-Handle Wrench 1 - Safety Glasses 1 - 20 oz. Bottle Oil (0.155 inch diameter)

WARNING: Always wear safety glasses or eye shields while as- sembling the trimmer.

TO REMOVE THE TRIMMER FROM CARTON

1.Remove the bottle of oil and parts bag from the carton.

TOOLS REQUIRED

1 - Knife to cut carton.

1 - T-Handle Wrench.

Figure 1 shows the trimmer completely as- sembled and positioned in the carton for ship- ment.

References to the right or left hand side of the trimmer are from the viewpoint of the opera- tor’s position behind the unit.

2.Remove the packing material positioned around the unit.

3.Cut down all four corners of the carton and lay the side panels flat.

4.Pull the trimmer out of the carton and off the base pad.

5.Remove packing material from around the trimmer head.

6.Remove protective plastic from front of frame.

	Figure 1
F-050204L	6