Toro 38515 owner manual Product Overview, Installing the Discharge Chute

Page 6

3. Hook the end of the control cable spring into the bottom hole of the control bar (Figure 4).

Figure 4

4. Fully insert the handle bolts (Figure 5).

Important: Ensure that you do not pinch the control cable (Figure 5).

Figure 6

Figure 5

5.Tighten the knobs until they are snug.

6.Adjust the control cable. Refer to Adjusting the Control Cable.

2.Installing the Discharge Chute

1Discharge chute

1Chute handle

3Phillips head screws

3Washers

3Locknuts

Procedure

Install the discharge chute as shown (Figure 6).

Product Overview

		Figure 7
1.	Discharge chute	6.	Knobs
2.	Chute handle	7.	Handle bolt (2)
3.	Control bar	8.	Rotor blades
4.	Handle	9.	Fuel tank cap
5.	Control panel

6

Image 6

Contents Safety IntroductionCCR 2450 GTS Snowthrower Training PreparationOperation Maintenance and Storage Toro Snowthrower Safety Clearing a Clogged Discharge Chute Safety and Instructional Decals Setup Unfolding the HandleInstalling the Discharge Chute Product OverviewOperation Mixing the Gasoline and OilFilling the Fuel Tank Starting the Rotor Blades Starting the EngineStopping the Engine Stopping the Rotor BladesRecommended Maintenance Schedules MaintenanceAdjusting the Discharge Chute Operating Tips Preventing Freeze-up after UseAdjusting the Control Cable Checking the CableStoring the Snowthrower StorageInspecting the Rotor Blades Folding the HandleToro 5-Year GTS Starting Guarantee