HOW to Start Your Unit, Starting a Warm Engine

Engine Choke Lever

ON/STOP

Switch

FULL HALF OFF

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

Choke

Lever

Muffler

Primer Bulb

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit

to run for 30 more seconds at OFF CHOKE before releasing the throttle trig- ger.

NOTE: If engine dies with the choke le- ver in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 5 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull start- er rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554--6723.

OPERATING POSITION

Cut from your left to your right.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

To stop engine:

S Release the throttle trigger.

XT600 specifications

The Weed Eater XT600 is a powerful and versatile string trimmer designed for homeowners and landscaping professionals seeking efficiency and reliability in their lawn care equipment. This trimmer combines innovative technology with user-friendly features to tackle a variety of yard maintenance tasks.

One of the standout features of the Weed Eater XT600 is its robust 22cc engine, which provides ample power for cutting through tough weeds and thick grass. This gas-powered engine is designed for optimum performance, ensuring that users can complete their outdoor tasks quickly and effectively. The XT600’s lightweight design further enhances maneuverability, making it easier to navigate around flower beds, fences, and other obstacles.

The XT600 employs a split-shaft design that allows for easy attachment of various accessories. This versatility makes it more than just a string trimmer; users can convert it into a blower, edger, or pruner, providing multiple solutions for yard maintenance with a single machine. Changing attachments is straightforward, allowing for seamless transitions between different tasks.

Equipped with a dual-line auto-feed system, the Weed Eater XT600 ensures that the cutting line advances automatically as needed, eliminating the hassle of stopping and manually adjusting the line. This feature not only saves time but also improves cutting efficiency, as users can maintain consistent trimming without interruptions.

Comfort is another priority for the XT600, which comes with an ergonomic handle design that reduces fatigue during prolonged use. The trimmer's lightweight frame and balanced weight distribution help users maintain control, leading to cleaner cuts and more precise trimming.

In terms of build quality, the XT600 features durable components that can withstand the rigors of regular use. The trimmer is designed to handle variable outdoor conditions, making it a reliable tool for various landscaping projects.

Additionally, the XT600 includes easy-start technology that simplifies the ignition process. This feature ensures that users can start the trimmer with minimal effort, reducing frustration and getting them back to work quickly.

Overall, the Weed Eater XT600 stands out in the market for its combination of power, versatility, and user-friendly features. Whether you are a homeowner looking to maintain a neat lawn or a landscaping professional needing a reliable trimmer, the XT600 provides the performance and adaptability needed to tackle any yard work with confidence.