Weed Eater XT600 Clean AIR Filter, Check for Loose, Fasteners and Parts, Check for Damaged or

Page 7

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

 

WARNING: Disconnect the spark

CLEAN AIR FILTER

 

A dirty air filter decreases engine perform-

plug before performing maintenance except

ance and increases fuel consumption and

for carburetor adjustments.

harmful emissions. Always clean after every

CHECK FOR LOOSE

5 hours of operation.

FASTENERS AND PARTS

1.

Clean the cover and the area around it to

 

keep dirt from falling into the carburetor

S

Spark Plug Boot

 

 

chamber when the cover is removed.

S

Air Filter

 

2.

Remove parts as illustrated.

S

Housing Screws

NOTE: To avoid creating a fire hazard or

S

Assist Handle Screw

producing harmful evaporative emissions, do

S

Debris Shield

not clean filter in gasoline or other flammable

CHECK FOR DAMAGED OR

solvent.

WORN PARTS

3.

Wash the filter in soap and water.

Contact an authorized service dealer for re-

4.

Allow filter to dry.

placement of damaged or worn parts.

5.

Add a few drops of oil to the filter;

S ON/STOP Switch -- Ensure ON/STOP

 

squeeze the filter to distribute oil.

 

switch functions properly by pushing and

6.

Replace parts.

 

releasing the switch. Make sure engine

 

 

 

 

 

Air Filter

 

stops. Wait 5 seconds before attempting to

 

 

 

 

 

 

restart unit to allow switch to reset. Restart

 

 

 

 

 

 

Screws

 

engine and continue.

 

 

 

 

 

 

S Fuel Tank -- Discontinue use of unit if fuel

 

 

 

 

 

 

 

 

 

 

 

 

tank shows signs of damage or leaks.

 

 

 

 

 

 

 

 

 

 

 

S Debris Shield -- Discontinue use of unit if

 

Air Filter Cover

 

debris shield is damaged.

 

 

REPLACE SPARK PLUG

INSPECT AND CLEAN UNIT AND DE-

Replace the spark plug each year to ensure

CALS

the engine starts easier and runs better. Set

S After each use, inspect complete unit for

spark plug gap at 0.025 in. Ignition timing is

 

loose or damaged parts. Clean the unit and

fixed and nonadjustable.

 

decals using a damp cloth with a mild deter-

1.

Twist, then pull off spark plug boot.

 

gent.

2.

Remove spark plug from cylinder and

S

Wipe off unit with a clean dry cloth.

 

discard.

 

 

3.

Replace with Champion RCJ-6Y spark

 

 

 

plug and tighten securely with a 3/4 inch

 

 

 

socket wrench.

 

 

4.

Reinstall the spark plug boot.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Eye Protection Hazard Zone Operator SafetyUnit / Maintenance Safety Fuel SafetyAttaching Shield Cutting SafetyAdjusting the Handle Transporting and StoragePrimer Bulb ON/STOP SwitchHOW to Stop Your Unit Know Your TrimmerOperating Position HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineTrimmer Line Advance Push and release the engine ON/STOP switchCutting Methods Fasteners and Parts Clean AIR FilterInspect and Clean Unit and DE Check for LooseSeasonal Storage Carburetor AdjustmentReplacing the Line Replacing the Cutting HeadTrouble Cause Remedy Troubleshooting Table OtherAgency and POULAN/WEED EATER, Divi

XT600 specifications

The Weed Eater XT600 is a powerful and versatile string trimmer designed for homeowners and landscaping professionals seeking efficiency and reliability in their lawn care equipment. This trimmer combines innovative technology with user-friendly features to tackle a variety of yard maintenance tasks.

One of the standout features of the Weed Eater XT600 is its robust 22cc engine, which provides ample power for cutting through tough weeds and thick grass. This gas-powered engine is designed for optimum performance, ensuring that users can complete their outdoor tasks quickly and effectively. The XT600’s lightweight design further enhances maneuverability, making it easier to navigate around flower beds, fences, and other obstacles.

The XT600 employs a split-shaft design that allows for easy attachment of various accessories. This versatility makes it more than just a string trimmer; users can convert it into a blower, edger, or pruner, providing multiple solutions for yard maintenance with a single machine. Changing attachments is straightforward, allowing for seamless transitions between different tasks.

Equipped with a dual-line auto-feed system, the Weed Eater XT600 ensures that the cutting line advances automatically as needed, eliminating the hassle of stopping and manually adjusting the line. This feature not only saves time but also improves cutting efficiency, as users can maintain consistent trimming without interruptions.

Comfort is another priority for the XT600, which comes with an ergonomic handle design that reduces fatigue during prolonged use. The trimmer's lightweight frame and balanced weight distribution help users maintain control, leading to cleaner cuts and more precise trimming.

In terms of build quality, the XT600 features durable components that can withstand the rigors of regular use. The trimmer is designed to handle variable outdoor conditions, making it a reliable tool for various landscaping projects.

Additionally, the XT600 includes easy-start technology that simplifies the ignition process. This feature ensures that users can start the trimmer with minimal effort, reducing frustration and getting them back to work quickly.

Overall, the Weed Eater XT600 stands out in the market for its combination of power, versatility, and user-friendly features. Whether you are a homeowner looking to maintain a neat lawn or a landscaping professional needing a reliable trimmer, the XT600 provides the performance and adaptability needed to tackle any yard work with confidence.
Top Page Image Contents