Murray 425007x92C manual II. Slope operation

Page 4

OWNER’S INFORMATION

b.Limit loads to those you can safely control.

c.Do not turn sharply. Use care when backing.

d.Use counterweights or wheel weights when suggested in the Instruction Book.

19.Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine.

20.Do not use this machine if you are mentally or physically unable to operate this machine safely.

21.Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower related injuries. These opera- tors should evaluate their ability to operate a riding mower safely enough to protect themselves and others from serious injury.

II. Slope operation

Slopes and rough terrain are major factors related to loss–of–control and tip–over accidents, which can result in severe injury or death. ALL slopes require extra caution. If you cannot back up the slope or if you feel uneasy on the slope, do not mow it. See the “Slope Guide” in the back of this book to check for safe operation.

DO

1.Mow up and down slopes, not across.

2.Remove obstacles such as rocks, limbs, etc...

3.Watch for holes, ruts or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

4.Use slow speed. Choose a low enough gear so that you will not have to stop or shift while on the slope.

5.Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

6.Use extra care with grass baggers or other attachments, they can change the stability of the machine.

7.Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

8.Avoid starting or stopping on a slope. If tires lose traction, turn off the blades and proceed slowly straight down the slope.

DO NOT

1.Do not turn on slopes unless absolutely necessary, then only turn slowly and gradually downhill, if possible.

2.Do not mow drop–offs, ditches or embankments. A wheel over the edge or an edge caving in could cause a sudden overturn and an injury or death.

3.Do not mow on wet grass. Reduced traction could cause sliding.

4.Do not try to stabilize the machine by putting your foot on the ground.

5.Do not use a grass bagger or other rear mounted accessories on steep slopes (greater than 10 degrees).

III. Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. NEVER assume that children will remain where you last saw them.

1.Keep children out of the mowing area and in the watchful care of another responsible adult.

2.Be alert and turn the engine off if children enter the area.

3.Before and when backing, look behind and down for small children.

4.Never carry children or any passengers, even with the blades off. They may fall off and be seriously injured or interfere with the safe operation of the machine.

5.Never allow children to operate the machine. Instruct children in the potential dangers of the machine.

6.Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

IV. Service

1.Use extra care when handling gasoline and other fuels. Fuels are flammable and the vapors are explosive.

a.Use only an approved container.

b.Never remove the gas cap or add fuel with the engine running. Allow the engine to cool for several minutes before refueling. Do not smoke.

c.Never refuel the machine indoors.

d.Never store the machine with fuel in the tank or fuel container inside where there is an open flame, such as a water heater.

2.Never start or run the engine inside a closed area.

3.Keep all nuts and bolts, especially the blade attachment nuts tight. Frequently check the blade(s) for wear or damage such as cracks and nicks. A blade that is bent or damaged must be immediately replaced with an original equipment blade from an authorized service dealer. For safety, replace the blade every two years. Keep the equipment in good condition.

4.Never tamper with the safety devices. Check their proper operation regularly.

5.To reduce fire hazards, keep the machine free of grass, leaves or other debris build–up. Clean up oil or fuel spills. Allow the machine to cool before storing.

6.Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

7.Never make adjustments or repairs with the engine running. The carburetor can be adjusted with the engine running. Do not change the engine governor settings or over–speed the engine.

8.Grass bagger components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. For storage, always make sure the grass bag is empty. Frequently check components and replace with manufacturer’s recom- mended parts when necessary.

9.Mower blade(s) are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing them or the blade housing area.

10.Check the brake operation frequently. Adjust and service as required.

11.Wait for all movement to stop before servicing any part of the unit.

Look for this symbol to indicate important safety precautions. This symbol indicates: “Attention! Become Alert! Your Safety Is At Risk.”

F–030723L

4

Image 4
Contents Model Table of Contents OWNER’S Information Environmental AwarenessII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingSafety Warning Pictorials International PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the SeatHOW to Assemble the Gauge Wheels HOW to Charge Maintenance Free Battery Maintenance Free BatteryHOW to Install the Battery Cables HOW to Prepare the Engine IMPORTANT! Before YOU Start MowingLocation of Controls OperationLift Lever HOW to USE THROTTLE/CHOKE Control HOW to USE the Shift LeverAttachments See the Instruction Book for the AttachmentHOW to SET the Parking Brake HOW to Change the Cutting HeightHOW to Stop the Unit HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsBefore Starting the Engine HOW to Start the EngineCarburetor Operating Tips Mowing and Bagging TipsMaintenance Frequency Maintenance Required CommentsHOW to Check the Muffler General RecommendationsHOW to Sharpen the Blade HOW to Remove and Install the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Clutch HOW to Check and Adjust the Drive BrakeHOW to Adjust the Shift Lever Disconnect the adjuster nut from the shifter bracket FigureWhere to Lubricate HOW to Check the Fuel FilterHOW to Remove the Mower Housing HOW to Install the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing HOW to Replace Motion Drive Belt RemovalInstallation HOW to Replace the Mower Drive Belt HOW to Install the Wheels Front WheelHOW to Replace the Fuse HOW to Replace the Light BulbHOW to Clean the Mower Housing BatteryTrouble Shooting Chart MURRAY, INC. Lawn Mower Central Parts Distributors 030723LRepair Parts Chassis & Hood Chassis & Hood Repair PartsKey Description Motion Drive Motion Drive Steering Key Part Description Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing Repair Parts Repair Parts Engine Mount Engine Mount Repair Parts Electrical System Electrical System 030723L Index Model No Model No Bushel Capacity

425007x92C specifications

Murray 425007x92C is a versatile and efficient piece of machinery that has garnered attention for its remarkable features and cutting-edge technologies. This model integrates advanced engineering with practical applications, making it a valuable asset in various industries.

One of the main features of the Murray 425007x92C is its powerful engine. Designed for optimal performance, this machinery is equipped with a high-capacity powertrain that delivers consistent output even in the most demanding conditions. This not only enhances its operational efficiency but also contributes to reduced overall fuel consumption, which translates to cost savings for users.

The innovative design of the Murray 425007x92C includes a user-friendly interface that simplifies operation and improves workflow. Operators can easily navigate through controls, with strategically placed buttons and levers that ensure intuitive handling. This focus on usability minimizes the learning curve for new operators, increasing productivity right from the start.

In terms of technology, the Murray 425007x92C incorporates state-of-the-art safety features. These include advanced braking systems and stability controls that provide enhanced safety for operators and bystanders alike. Furthermore, the machinery is equipped with real-time diagnostic tools that monitor its performance and alert users to any potential issues before they escalate. This emphasis on safety and reliability ensures that downtime is minimized.

The construction of the Murray 425007x92C emphasizes durability. Made from high-quality materials, it resists wear and tear and is built to withstand harsh working environments. This robust construction not only enhances its lifespan but also decreases the need for frequent maintenance, making it a cost-effective choice for businesses.

Another distinguishing characteristic of the Murray 425007x92C is its adaptability. It can be easily customized with various attachments that cater to different tasks, ranging from landscaping to heavy construction. This versatility allows operators to switch between applications seamlessly, maximizing productivity and making it an indispensable tool for contractors and maintenance personnel.

Overall, the Murray 425007x92C stands out for its combination of power, safety, durability, and adaptability. Whether used in construction, agricultural, or industrial settings, it proves to be a reliable and efficient solution for various operational needs, reflecting modern engineering excellence.