SmartPool Inc PE13 warranty Battery Installation, Low Battery Indicator

Page 6

Using the base as a template, drill 3 holes of 1/8" diameter on the top seat. Mount the unit onto the top seat as shown (right).

Battery Installation

The pool side alarm is designed to be powered by a standard 9V alkaline battery.

After installing battery, press the TEST button located at the

front on the control unit. The alarm will sound either one beep, or 5 consecutive beeps.This will depend whether the unit is turned ON or OFF.

Low Battery Indicator

The unit has a built-in microprocessor which automatically monitors the 9V battery level. When this battery is running low, it will sound a chirping tone approximately once every 60 seconds. Simply replace the 9V battery with a new one when this occurs.

Image 6

Contents Table of contents Important Please read first Rectangular or oval pools Round poolsInstallation Pool Side Alarm Assembly Sensitivity AdjustBattery Installation Low Battery IndicatorReset the unit Turn the unit onTurn the unit OFF Alarm unit function test Sensor CalibrationRF radio frequency signal link testing Transmitter Channel A/B select Remote receiver Remote Receiver Channel A/B selectBack up power How to connect to your home security systemExt. Connection Trouble Shooting Alarm unit cannot detect underwater wave signalReceiver alarm siren cannot be turned OFF