Murray 387002x92A manual OWNER’S Information, Responsibility of the Owner

Page 3

OWNER’S INFORMATION

This instruction book is for several different models. The instructions are written for a person with some mechanical ability. Like most ser- vice books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the unit.

Know your product: If you understand the unit and how the unit oper- ates, you will get the best performance. As you read this manual, com- pare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an accident, follow the operating instruc- tions and the safety rules. Keep this manual for future reference.

IMPORTANT: Many units are not assembled and are sold in car- tons. It is the responsibility of the owner to make sure the assembly instructions in this manual are exactly followed. Other units are pur- chased in an assembled condition. On assembled units, it is the re- sponsibility of the owner to make sure the unit is correctly assembled. The owner must carefully check the unit according to the instructions in this manual before it is first used.

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other repro- ductive harm.

Battery posts, terminals and related accesso- ries contain lead and lead compounds, chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

RESPONSIBILITY OF THE OWNER

The responsibility of the owner is to follow the instructions below.

1.Carefully read and follow the rules for safe operation.

2.Follow all the assembly instructions.

3.Inspect the unit.

4.Make sure that the operator of the unit knows how to correctly use all standard and accessory equipment.

5.Operate the unit only with guards, shields, and other safety items in place and working correctly.

6.Correctly adjust the unit.

7.Service the unit only with authorized or approved replacement parts.

8.Complete all maintenance on the unit.

Environmental Awareness

DDo not fill the engine’s fuel tank completely full.

DDrain fuel for off-season storage.

DUse only unleaded gasoline.

DService the air cleaner regularly.

DChange oil regularly. Use 10W-30 oil in summer.

DTune-up the engine regularly.

DKeep equipment in efficient operating condition.

DDispose of used engine oil properly.

SAFETY RULES

Safe Operation Practices for Ride-on Mowers

WARNING: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

I. General operation

1.Read, understand and follow all instructions in the Instruction Book, on the machine, the engine and with any attachments before starting.

2.Only allow responsible adults, who are familiar with the instructions, to operate the machine.

3.Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

4.Be sure the area is clear of other people before mowing. Stop the machine if anyone enters the area.

5.Never carry passengers.

6.Turn off power to the blades or any attachments before backing up. Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

7.Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass bagger or the mower guard in place.

8.Slow down before turning.

9.Never leave a machine unattended with the engine running. Always turn off the blade(s), set the parking brake, stop the engine and remove the key before dismounting.

10.Turn off power to attachment(s) when transporting or not in use. Turn off the blade(s) when not mowing.

11.Stop the engine before removing the grass bagger or unclogging the chute.

12.Mow only in daylight or good artificial light.

13.Do not operate the machine while under the influence of alcohol or drugs or when very tired.

14.Watch for traffic when operating near or crossing roadways.

15.Use extra caution when loading or unloading the machine into a trailer or truck.

16.Always wear goggles, safety glasses, or an eye shield when you operate the unit to protect your eyes from foreign objects that can be thrown from the unit. Always wear eye protection when you make an adjustment or repair to the machine.

17.Use care when pulling loads or using heavy equipment.

a.Use only approved drawbar hitch points.

b.Limit loads to those you can safely control.

F-040717L

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Table of Contents Responsibility of the Owner OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials International PictorialsAssembly AssemblyHOW to Charge the Maintenance Free Battery Maintenance Free BatteryHOW to Assemble the Steering Wheel HOW to Install the SeatCheck the Tires HOW to Prepare the EngineCheck the Level of the Mower Housing IMPORTANT! Before YOU Start MowingOperation Location of ControlsLift Lever HOW to USE the Throttle Control HOW to USE the Shift LeverAttachments HOW to Transport the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Stop the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingCarburetor HOW to Start the EngineHOW to Start with a Weak Battery Before Starting the EngineMowing and Bagging Tips Operating TipsGeneral Recommendations MaintenanceMaintenance Chart HOW to Check the MufflerHOW to Remove and Install the Blade HOW to Sharpen the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Clutch HOW to Check and Adjust the Drive BrakeHOW to Clean the Battery HOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Level the Mower Housing Front to Back AdjustmentSide to Side Adjustment Removal HOW to Replace the Motion Drive BeltHOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsBattery HOW to Replace the FuseHOW to Replace the Light Bulb HOW to Clean the Mower HousingProblem The engine will not start Trouble Shooting ChartMURRAY, INC. Lawn Mower Central Parts Distributors Chassis & Hood Repair PartsKey Description Repair Parts Motion Drive Motion Drive Steering Key Part Description Mower Housing Suspension Repair Parts Mower Housing Repair Parts Engine Mount Repair Parts Repair Parts Electrical System Electrical System 040717L 040717L 040717L Index Lawn Tractor Accessories

387002x92A specifications

Murray 387002x92A is a notable piece of equipment in the realm of power tools, designed to deliver exceptional performance and reliability for a variety of tasks. As a sophisticated model, it showcases numerous features and technologies that set it apart in the market.

One of its main features is the powerful motor, which ensures optimal performance for heavy-duty jobs. This motor is designed to generate substantial torque, making it suitable for both light and heavy applications. The lightweight build of the Murray 387002x92A also enhances its usability, allowing for easy maneuverability without sacrificing power. This combination of strength and ease of use makes it a favorite among both professionals and DIY enthusiasts.

Another significant characteristic of the Murray 387002x92A is its precision engineering. The design integrates advanced technology that allows for accurate cuts and operations, ensuring that users achieve the best possible results. This is particularly useful in projects that require meticulous attention to detail, as it minimizes the risk of error.

The tool incorporates state-of-the-art safety features, including slip-resistant grips and an emergency shut-off mechanism, which enhances user safety during operation. These safety measures are crucial for protecting users from accidents while ensuring that they can focus on their work without distraction.

Moreover, the Murray 387002x92A is built with durability in mind. The materials used in its construction are resistant to wear and tear, making it a long-lasting investment for users. This resilience ensures that the equipment can withstand tough working conditions and remain functional over time.

In terms of versatility, the Murray 387002x92A excels with its myriad of attachments and accessories that allow for a wide range of applications. Whether it's woodworking, metal fabrication, or other complex tasks, this model can adapt to meet various needs.

Maintenance is also simplified with the Murray 387002x92A, as its design facilitates easy cleaning and part replacement. This feature helps in prolonging the lifespan of the tool, keeping it in excellent condition for years to come.

In summary, the Murray 387002x92A stands out for its powerful performance, precision engineering, robust safety features, and impressive versatility. It is an ideal choice for those who seek a reliable and efficient tool capable of handling a diverse range of projects, making it a valuable addition to any toolbox.
Top Page Image Contents