Toro 38272, 38282 Engaging the Rotor Blades, Disengaging the Rotor Blades, Stopping the Engine

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar against the handle (Figure 20).

Figure 20

1.Control bar

Disengaging the Rotor Blades

To disengage the rotor blades, release the control bar (Figure 21).

Figure 22

1.Ignition key

Adjusting the Discharge Chute and Chute Deflector

To adjust the discharge chute, move the chute handle as shown in Figure 23.

Figure 23

1.Chute handle

Figure 21

Stopping the Engine

To stop the engine, pull the ignition key outward until it clicks into the Off position (Figure 22) or move the choke lever fully to the right (Figure 16).

To raise or lower the angle of the chute deflector, press the trigger on the chute deflector and move the chute deflector up or down (Figure 24). Release the trigger to lock the chute deflector in place.

12