Huawei HG530 manual Restoring Default Settings, Select Factory Default Settings

Page 15
5.5 Restoring Default Settings

5.4Changing the IP Address Used for Logging In to the Web-Based Configuration Utility

To make the login IP address easy to remember, you can change the IP address after logging in to the Web-based configuration utility.

To change the IP address, do as follows:

1.Log in to the Web-based configuration utility.

2.Choose Basic > LAN Setting in the navigation tree to display the LAN settings page.

3.Enter a new IP address as desired in the Main IP Address text box. Then, enter a subnet mask in Main Subnet Mask text box.

4.Click Submit to save the settings.

To log in to the Web-based configuration utility after you change the IP address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG530 so that the computer can access the Web-based configuration utility.

5.5 Restoring Default Settings

You can quickly restore the default settings of the HG530 by pressing the Reset button on the rear panel. To restore the default settings, press and hold the Reset button for over six seconds after the HG530 is powered on, and then release the button. In addition, you can restore the default settings of the HG530 through the Web-based configuration utility. To restore the default settings through the Web-based configuration utility, do as follows:

1.Log in to the Web-based configuration utility.

2.Choose Tools > Reboot in the navigation tree to display the system management page.

3.Select Factory Default Settings.

4.Click Restart.

13

Image 15
Contents HUAWEI HG530 Home Gateway User Guide4 Configuring the Wireless Network Connection Contents2 Connecting the Cables and Getting Started 3 Setting the Network-Access Parameters1 Warnings and Precautions Environmental Requirements for Using the DeviceBasic Requirements Precautions for Using Wireless Devices Accessory RequirementsAreas with Inflammables and Explosives Safety of Children MaintenanceEnvironmental Protection 2 Connecting the Cables and Getting Started 2.1 Connecting The Cables2.2 Getting Started Page 3 Setting the Network-Access Parameters 2 Select a PVC number, such as 1, from the PVC drop-down combo box 3 Select Connect to the Internet, and then click Next 4 Configuring the Wireless Network Connection 4. Configure the wireless network connection on your computer 5 Configuring the Device 5.3 Changing the Wireless Network Name and the Access Password 5.2 Enabling or Disabling the Wireless Network Function3. Select Factory Default Settings 5.5 Restoring Default SettingsPage Can I use the terminal as a DHCP server? 6 FAQsHow can I quickly restore the default settings of the terminal? How can I configure a computer to use a static IP address?2 In Subnet mask, enter 3 In Default gateway, enter What can I do if I cannot visit Web sites through the terminal?3 Replace telephone lines 2 Choose Tools Internet Options If the driver is improperly installed, install it properly What can I do if I cannot access the terminal configuration page? What can I do if noises exist during telephone calls? 7 Appendix 7.1 Indicators7.2 Interfaces and Buttons It is the power switch and is used to power on orz No data is being transmitted through the WLAN Specification 7.3 Default Settings7.4 Technical Specifications SettingSpecification Trademarks and Permissions Import and Export Regulations NO WARRANTY
Related manuals
Manual 29 pages 58.46 Kb