Huawei HG530 manual FAQs, Can I use the terminal as a DHCP server?

Page 17

6 FAQs

Can I use the terminal as a DHCP server?

Yes, you can. The terminal incorporates the DHCP server software.

How can I quickly restore the default settings of the terminal?

To restore the default settings of the terminal, power on the terminal, press and hold the Reset button for a minimum of over six seconds, and then release the Reset button.

How can I change the password used to access the terminal configuration page?

Access the terminal configuration page, choose Tools > System Management, and then change the password on the System Management page.

How can I configure a computer to use a static IP address?

Take a computer that runs Windows XP as an example. To configure the computer to use a static IP address, do as follows:

1.In the Control Panel window, double-clickNetwork Connections to display the Network Connections window.

2.In the Network Connections window, right-click the working Local Area Connection and choose Properties.

3.In the This connection uses the following items group box of the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP). Click Properties.

4.Select Use the following IP address.

5.Set the IP address of the computer and ensure that the IP address is in the same network segment as the local area network (LAN) IP address of the terminal.

Assume that the default LAN IP address of the terminal is 192.168.1.1. To set the IP address of the computer, do as follows:

15

Image 17

Contents HUAWEI HG530 Home Gateway User Guide2 Connecting the Cables and Getting Started Contents3 Setting the Network-Access Parameters 4 Configuring the Wireless Network ConnectionBasic Requirements 1 Warnings and PrecautionsEnvironmental Requirements for Using the Device Areas with Inflammables and Explosives Precautions for Using Wireless DevicesAccessory Requirements Environmental Protection Safety of ChildrenMaintenance 2.2 Getting Started 2 Connecting the Cables and Getting Started2.1 Connecting The Cables Page 3 Setting the Network-Access Parameters 2 Select a PVC number, such as 1, from the PVC drop-down combo box 3 Select Connect to the Internet, and then click Next 4 Configuring the Wireless Network Connection 4. Configure the wireless network connection on your computer 5 Configuring the Device 5.3 Changing the Wireless Network Name and the Access Password 5.2 Enabling or Disabling the Wireless Network Function3. Select Factory Default Settings 5.5 Restoring Default SettingsPage How can I quickly restore the default settings of the terminal? 6 FAQsHow can I configure a computer to use a static IP address? Can I use the terminal as a DHCP server?2 In Subnet mask, enter 3 In Default gateway, enter What can I do if I cannot visit Web sites through the terminal?3 Replace telephone lines 2 Choose Tools Internet Options If the driver is improperly installed, install it properly What can I do if I cannot access the terminal configuration page? What can I do if noises exist during telephone calls? 7 Appendix 7.1 Indicatorsz No data is being transmitted through the WLAN 7.2 Interfaces and ButtonsIt is the power switch and is used to power on or 7.4 Technical Specifications 7.3 Default SettingsSetting SpecificationSpecification Trademarks and Permissions Import and Export Regulations NO WARRANTY

Related manuals

Manual 29 pages 58.46 Kb