Huawei HG530 manual Connecting the Cables and Getting Started, Connecting The Cables

Page 6

2 Connecting the Cables and Getting Started

2 Connecting the Cables and Getting Started

Thank you for purchasing the HUAWEI HG530 Home Gateway (hereinafter referred to as the HG530).

2.1 Connecting The Cables

If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables.

1.	Power adapter	2.	Computer
3.	Telephone	4.	Splitter
5.	Telephone jack on the wall	a. MODEM interface
b. PHONE interface		c. LINE interface

2.2 Getting Started

To power on the HG530, press the power button on the side panel of the HG530.

After you power on the HG530, the ADSL indicator blinks (for less than three minutes), which indicates that the HG530 is being activated. After the ADSL

4

Image 6

Contents User Guide HUAWEI HG530 Home Gateway3 Setting the Network-Access Parameters Contents2 Connecting the Cables and Getting Started 4 Configuring the Wireless Network Connection1 Warnings and Precautions Environmental Requirements for Using the DeviceBasic Requirements Precautions for Using Wireless Devices Accessory RequirementsAreas with Inflammables and Explosives Safety of Children MaintenanceEnvironmental Protection 2 Connecting the Cables and Getting Started 2.1 Connecting The Cables2.2 Getting Started Page 3 Setting the Network-Access Parameters 2 Select a PVC number, such as 1, from the PVC drop-down combo box 3 Select Connect to the Internet, and then click Next 4 Configuring the Wireless Network Connection 4. Configure the wireless network connection on your computer 5 Configuring the Device 5.2 Enabling or Disabling the Wireless Network Function 5.3 Changing the Wireless Network Name and the Access Password5.5 Restoring Default Settings 3. Select Factory Default SettingsPage How can I configure a computer to use a static IP address? 6 FAQsHow can I quickly restore the default settings of the terminal? Can I use the terminal as a DHCP server?What can I do if I cannot visit Web sites through the terminal? 2 In Subnet mask, enter 3 In Default gateway, enter3 Replace telephone lines 2 Choose Tools Internet Options If the driver is improperly installed, install it properly What can I do if I cannot access the terminal configuration page? What can I do if noises exist during telephone calls? 7.1 Indicators 7 Appendix7.2 Interfaces and Buttons It is the power switch and is used to power on orz No data is being transmitted through the WLAN Setting 7.3 Default Settings7.4 Technical Specifications SpecificationSpecification Trademarks and Permissions NO WARRANTY Import and Export Regulations

Related manuals

Manual 29 pages 58.46 Kb