Makita G5711R, G571O R, G351O R, G341O R, G3511R manual HOW to USE Auto Idle, Checking the Operation

Page 26

5. AUTO IDLE (GSlOR, G3511R, G571OR, 65711R)

AUTO IDLE automatically reduces engine speed when load is OFF, and automat- ically increases engine speed to rated r.p.m. when load is ON.

AUTO IDLE provides fuel economy and low noise operation at no-load running.

(1)HOW TO USE AUTO IDLE

I Start the engine with AUTO IDLE

SWITCH off.

NOTE :

Warm up the engine without a load for a few minutes.

mTurn AUTO IDLE SWITCH on.

f

FULL POV

(2) CHECKING THE OPERATION

When AUTO IDLE does not operate normally, please check following :

IOverloadede ?

Please make it sure that the generator is not overload. NOTE :

Most induction loads such as electric motors require three to five times more wattage than their ratings during starting.

This starting wattage should not exceed the rated output of the generator for proper operation of AUTO IDLE.

ITurn AUTO IDLE SWITCH off when the AUTO IDLE does not work normally under the rated output.

NOTE :

The AUTO IDLE may not operate when the applied load is under 40W. In such cases turn the AUTO IDLE SWITCH off.

(3)STOPPING THE ENGINE I Turn off the switch of load.

I Switch off generator’s AC breaker. I Disconnecttool or appliance.

I Turn the AUTO IDLE SWITCH off.

Push STOP SWITCH to stop.

NOTE :

Allow the engine about 3 minutes to cool down at no-load before stopping.

- 18 -

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Generator Model G341O RPage California Emission Control Warranty Statement Limited Warranty What is not Covered Under this Warranty Repair and Replacement of EMISSION-RELATED Parts Page Contents Safety Precautions Page Specifications Components PRE-OPERATION Checks Check Engine OILCheck Engine Fuel Grounding the Generator Checking Component PartsCheck Generator Surroundings Page Operating Procedures Starting the EngineStyle Precautions for Using the GFCl Receptacles Start SV I TCH Connectingto Domestic Circuits House Wiring Page Generator 4P-Receptacle DC Application Safety Precautions While ChargingFuse Replacement Stopping the Generator OIL SensorHOW to USE Auto Idle Checking the OperationWAlTAGE Information Extension Cord Chart Voltage Drop in Electric Extension CordsMaintenance Schedule Periodic Maintenance0daily HOW-TO Maintenance Engine OIL ChangeCleaning and Adjusting Spark Plug Cleaning Fuel Strainer no SmokingPreparation for Storage Troubleshooting Wiring Diagram G3510R ~za G571OR G5711R Fpsw MG, SW Keysw REC2Electric Starter BatteryStarting Procedures Electric Starter G3511R, G5711RHOW to Install Battery Page Makita Corporation

G3511R, G341O R, G351O R, G5711R, G571O R specifications

Makita is renowned for its high-quality power tools, and the G5710R, G5711R, G3410R, G3511R, and G3510R models are no exception. These tools exemplify innovation, reliability, and superior performance, tailored to meet the needs of both professionals and DIY enthusiasts.

The Makita G5710R and G5711R models stand out for their robust construction and powerful motor capabilities. They are designed for heavy-duty applications, making them ideal for contractors or serious hobbyists who require maximum efficiency and longevity. Equipped with advanced cooling systems, these tools maintain optimal operating temperatures, thus prolonging motor life and enhancing performance. Additionally, the ergonomic design ensures comfortable handling, reducing fatigue during prolonged use.

Moving on to the G3410R and G3511R models, these tools feature a unique anti-vibration technology that minimizes operator fatigue while improving accuracy. This technology is particularly beneficial in tasks requiring precision, such as fine woodworking or intricate metalwork. The G3511R model comes specifically with an adjustable speed control, allowing users to tailor the speed for a variety of applications, whether it’s drilling into tough materials or delicate jobs that require finesse.

The G3510R model enhances user experience with its notable safety features, including automatic shut-off capabilities and overload protection. These features provide peace of mind for users, ensuring that they are safeguarded against potential mishaps during operation. Moreover, the inclusion of high-quality, durable materials in the design ensures that these tools can withstand the rigors of daily use in tough working environments.

In summary, the Makita G5710R, G5711R, G3410R, G3511R, and G3510R tools reflect the company’s commitment to excellence. With powerful motors, ergonomic designs, innovative technologies, and robust safety features, these models deliver unparalleled performance. Whether you’re a seasoned professional or an eager DIYer, investing in these tools means choosing reliability, efficiency, and advanced technology. As the market continues to evolve, Makita remains steadfast in providing top-notch solutions for every user's needs.
Top Page Image Contents