Murray 11053x92a manual Ment spark plug, Filter cover and the air filter

Page 17

MAINTENANCE

SPARK PLUG

3. Before installing the spark plug, coat

 

the threads lightly with oil for easy re-

Check the spark plug every 25 hours. Re-

moval. Tighten the spark plug to a torque

place the spark plug if the electrodes are

of 15 foot-pounds.

pitted or burned or if the porcelain is

 

 

cracked.

Feeler Gauge

 

0.035”

1.Make sure the spark plug is clean. Clean the spark plug by carefully scrap- ing the electrodes (do not sand blast or use a wire brush).

2. Check the spark plug gap with a feeler

 

 

gauge. See “Product Specifications” for

Spark Plug

 

the correct spark plug gap and replace-

Figure 11

 

ment spark plug.

 

 

 

 

 

 

 

 

 

 

 

HOW TO CLEAN THE AIR FILTER

The engine uses a foam air filter that can be cleaned and reused. Clean and oil the air filter every 25 hours. Clean more often in dusty conditions. Remove and clean the air filter as follows:

CAUTION: Never run the engine without the air filter installed. An air filter clogged with dust can result in loss of engine power and can cause excessive wear or damage to the engine. If the air filter is clogged, clean or replace immediately.

1.

Disconnect the spark plug wire from the

 

spark plug.

2.

Remove the screws from the air filter

 

cover (see Figure 12). Remove the air

 

filter cover and the air filter.

3.

Wipe the cover and the inside of the air

 

filter housing with a clean cloth.

4.

Clean the air filter in a solution of water

 

and household detergent. Rinse tho-

 

roughtly in clean water.

6.Cover the outside of the air filter with oil. Use the same type of oil as used to make the fuel mixture. Lightly squeeze the air filter to distribute and remove any excess oil.

7.Put the clean air filter into the air filter housing.

8.Install the air filter cover and secure with the screws as shown.

9.Connect the spark plug wire to the spark plug.

Air Filter

Cover

5. Wrap the air filter in a dry clean cloth.

Filter Housing

Screw

Squeeze out (do not twist) all solution

until dry.

Figure 12

CYLINDER EXHAUST PORTS

Clean the cylinder exhaust ports after every 75 hours of operation. For this procedure, we recommend that you take your unit to a Au- thorized Service Center.

F-051302L

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model MURRAY, INC. Two Year Limited Warranty Responsibility of the Owner OWNER’S InformationFuel Safety Safety RulesOperating Safety Safe Operation Practices for CultivatorSafe Storage Repair / Adjustments SafetySlow Fast Fuel Oil Choke OFF Half Choke Full Choke International SymbolsAssembly Parts Packed Separately in Carton AssemblyHOW to Remove the Cultivator from the Carton HOW to Assemble the HandleDle and damage the engine casing Outside of the lower handle as youTighten the knobs Checklist EYE Protection OperationKnow Your Cultivator HOW to Operate the Cultivator HOW to USE the CultivatorHow To Stop The Cultivator How To Set The Depth Rod And WheelsHow To Mix The Fuel Mixture How To Prepare The EngineFuel Mixture Chart mixture SI. Metric Before Starting the EngineHOW to Start the Engine Cultivating Tips Hints for Depth ROD or Wheel AdjustmentLight cultivation with moderate growth To 2 inches depth Seed bed preparation 4 to 6 inches depthProduct Specifications MaintenanceCustomer Responsibilities General RecommendationsRemove the air vent screw see Figure LubricationFilter cover and the air filter Ment spark plugHOW to Remove and Install the Tines Service and AdjustmentTine Installation Tine RemovalEngine Shown With Fuel Tank Removed HOW to Adjust the CarburetorEngine StorageCultivator Trouble Cause Correction Trouble Shooting ChartModel 11053x92A KEY 485 483 323393A 480 482 484 493 481 490 496 492 494 495 491 660 650 661 662 663 946 950930 948 943 051302L MURRAY, INC. Lawn Mower Central Parts Distributors HOW to Order Repair Parts

11053x92a specifications

The Murray 11053x92a is a standout model that excels in various applications, making it a valuable asset in both residential and commercial settings. This model combines innovative technology and robust design, tailored to meet the demands of modern users.

One of the main features of the Murray 11053x92a is its powerful engine. Equipped with a high-performance motor, this model ensures efficient operation and a high level of reliability. The engine's design emphasizes fuel efficiency, allowing for extended usage without frequent refueling. This is particularly advantageous for lawn care professionals and homeowners alike, as it helps save time and reduces operational costs.

The cutting deck of the Murray 11053x92a is another highlight. With a generous cutting width, it delivers an expansive coverage area, allowing users to complete their tasks more quickly. The adjustable cutting height feature lets users customize grass length, accommodating various lawn conditions and personal preferences. This versatility makes it suitable for tackling both well-maintained lawns and overgrown areas.

In terms of technology, the Murray 11053x92a incorporates user-friendly features that enhance the overall experience. Its easy-start ignition system ensures quick starts with minimal effort, eliminating frustration associated with manual pull-starts. Additionally, the ergonomic handle design provides comfort and control during operation, reducing user fatigue during extended use.

Safety is a paramount consideration in the design of the Murray 11053x92a. It comes equipped with a blade brake system that automatically stops the blade when the operator releases the handle, minimizing the risk of accidents. This feature is especially important for families with children or pets playing nearby.

Moreover, the model’s construction emphasizes durability. Built with high-quality materials, it can withstand the rigors of tough mowing conditions. Its robust frame is designed to resist rust and corrosion, ensuring longevity and maintaining aesthetic appeal over time.

In summary, the Murray 11053x92a is distinguished by its powerful engine, versatile cutting deck, user-friendly features, safety mechanisms, and durable construction. These characteristics make it a reliable choice for anyone in need of an efficient and effective mowing solution, whether for residential lawns or larger commercial properties.
Top Page Image Contents