Murray 11053x92a manual HOW to Start the Engine

Page 13

OPERATION

HOW TO START THE ENGINE

Before you start the engine, make sure that

6.

Hold the rope handle with your right

you have read and understand all the in-

 

hand and pull to start the engine.

structions on the preceding pages.

7.

If the engine does not start, do not re-

 

1. Fill the fuel tank to 1/2 inch below the

 

peat steps 5 and 6 more that three times

bottom of the fill neck. Reinstall the fuel

 

before you move the choke off or on.

tank cap securely. Always use fresh fuel.

8.

When the engine starts, move the choke

Never use fuel that could be stale from

 

lever to the HALF CHOKE position.

long periods of storage.

 

 

When the engine runs smoothly, move

 

 

2. Move the on-off switch to the ON posi-

 

the choke lever to the NO CHOKE posi-

 

tion.

tion (see Figure 8).

 

 

 

3. If the engine is cold, move the choke

 

NOTE: If the tines do not stop when

 

the throttle control is released, adjust

control to the FULL CHOKE position (all

 

 

the carburetor idle speed. See “How

the way down).

 

 

To Adjust The Carburetor” in the Ser-

 

 

NOTE: Do not choke a hot or warm

 

vice And Adjustments section.

engine.

9.

To stop the engine, release the throttle

 

4. Put the unit firmly on the tines in an open

 

control and move the on-off switch to

area away from by-standers.

 

the OFF position.

5. Push the compression release and

10.

If the engine becomes flooded remove

hold the right handle firmly with your left

 

and dry the spark plug. See “Spark Plug

hand.

 

Maintenance” in the Maintenance sec-

CAUTION: DO NOT start the engine

 

tion of this manual. Then, pull the starter

 

rope with the choke lever in the NO

without FIRST pushing in the yellow

 

 

CHOKE position.

compression relier valve. Failure to

 

 

WARNING: The muffler and sur-

do so can result in bruised fingers

 

and sudden equipment movement

 

rounding areas become hot af-

which could result in minor or moder-

 

ter running the engine. Avoid

ate injury.

these areas.

ON / OFF

 

Recoil Starter Handle

Switch

 

 

 

 

Air

 

 

Cleaner

 

No Choke

 

Compression

Half Choke

 

Release

 

 

 

Full Choke

Figure 8

 

Choke Control

 

 

F-051302L

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model MURRAY, INC. Two Year Limited Warranty Responsibility of the Owner OWNER’S InformationFuel Safety Safety RulesOperating Safety Safe Operation Practices for CultivatorSafe Storage Repair / Adjustments SafetySlow Fast Fuel Oil Choke OFF Half Choke Full Choke International SymbolsAssembly Parts Packed Separately in Carton AssemblyHOW to Remove the Cultivator from the Carton HOW to Assemble the HandleTighten the knobs Outside of the lower handle as youDle and damage the engine casing Checklist Know Your Cultivator OperationEYE Protection HOW to Operate the Cultivator HOW to USE the CultivatorHow To Stop The Cultivator How To Set The Depth Rod And WheelsHow To Mix The Fuel Mixture How To Prepare The EngineFuel Mixture Chart mixture SI. Metric Before Starting the EngineHOW to Start the Engine Cultivating Tips Hints for Depth ROD or Wheel AdjustmentLight cultivation with moderate growth To 2 inches depth Seed bed preparation 4 to 6 inches depthProduct Specifications MaintenanceCustomer Responsibilities General RecommendationsRemove the air vent screw see Figure LubricationFilter cover and the air filter Ment spark plugHOW to Remove and Install the Tines Service and AdjustmentTine Installation Tine RemovalEngine Shown With Fuel Tank Removed HOW to Adjust the CarburetorCultivator StorageEngine Trouble Cause Correction Trouble Shooting ChartModel 11053x92A KEY 485 483 323393A 480 482 484 493 481 490 496 492 494 495 491 660 650 661 662 663 946 950930 948 943 051302L MURRAY, INC. Lawn Mower Central Parts Distributors HOW to Order Repair Parts

11053x92a specifications

The Murray 11053x92a is a standout model that excels in various applications, making it a valuable asset in both residential and commercial settings. This model combines innovative technology and robust design, tailored to meet the demands of modern users.

One of the main features of the Murray 11053x92a is its powerful engine. Equipped with a high-performance motor, this model ensures efficient operation and a high level of reliability. The engine's design emphasizes fuel efficiency, allowing for extended usage without frequent refueling. This is particularly advantageous for lawn care professionals and homeowners alike, as it helps save time and reduces operational costs.

The cutting deck of the Murray 11053x92a is another highlight. With a generous cutting width, it delivers an expansive coverage area, allowing users to complete their tasks more quickly. The adjustable cutting height feature lets users customize grass length, accommodating various lawn conditions and personal preferences. This versatility makes it suitable for tackling both well-maintained lawns and overgrown areas.

In terms of technology, the Murray 11053x92a incorporates user-friendly features that enhance the overall experience. Its easy-start ignition system ensures quick starts with minimal effort, eliminating frustration associated with manual pull-starts. Additionally, the ergonomic handle design provides comfort and control during operation, reducing user fatigue during extended use.

Safety is a paramount consideration in the design of the Murray 11053x92a. It comes equipped with a blade brake system that automatically stops the blade when the operator releases the handle, minimizing the risk of accidents. This feature is especially important for families with children or pets playing nearby.

Moreover, the model’s construction emphasizes durability. Built with high-quality materials, it can withstand the rigors of tough mowing conditions. Its robust frame is designed to resist rust and corrosion, ensuring longevity and maintaining aesthetic appeal over time.

In summary, the Murray 11053x92a is distinguished by its powerful engine, versatile cutting deck, user-friendly features, safety mechanisms, and durable construction. These characteristics make it a reliable choice for anyone in need of an efficient and effective mowing solution, whether for residential lawns or larger commercial properties.
Top Page Image Contents