ALIGN INSTALLATION HOLES
Bolt
Holes
Twist shield in this direction to assemble
CAUTION: Sharp line limiter blade
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Trigger Switch
Assist Handle
Cord 
Retainer
Recessed
Plug
Locking
Sleeve
Assembly
Air
Vents
Debris Shield
Motor Housing
Trimmer Head with 0.065 in.
Trimmer Line
Tap Button Line Limiter Blade
RECESSED PLUG
The RECESSED PLUG is where you attach your extension cord to the unit.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold and guide the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switchto operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting line to the proper cutting length.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance the cutting line during operation and to remove the spool during line replacement.
5