Check for Loose Fasteners and Parts | Weed Eater Plus LE specification

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

WARNING: Muffler is very hot during and after use. Do not touch the muffler or al- low combustible material such as dry grass or fuel to do so.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, however, the muffler and spark arresting screen will not re- quire any service.

After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with pre--wound spool, or cut a length of 20 feet of 0.080! (2 mm) diameter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert one end of the line about 1/2 inch (1 cm) into the small hole on the inside of spool.

Small

HoleSpool

LE, Plus LE specifications

The Weed Eater Plus LE is a versatile and efficient gardening tool designed for homeowners and gardening enthusiasts who seek an effective solution for weed control and lawn maintenance. This reliable and robust trimmer stands out due to its combination of advanced features, technologies, and user-friendly characteristics.

One of the notable features of the Weed Eater Plus LE is its powerful engine. Equipped with a high-performance gas engine, it offers impressive torque and speed, ensuring that even the toughest weeds and overgrown grass can be managed with ease. This enhanced power provides the user with the confidence that they can tackle any yard challenge, whether it be edging along pathways, trimming around flower beds, or clearing out dense brush.

In addition to its robust engine, the Weed Eater Plus LE incorporates an innovative ergonomic design that allows for comfortable operation. The adjustable handle provides an improved grip, reducing fatigue during extended use. This trimmer features a lightweight construction, which makes it easy to maneuver and handle, resulting in enhanced user control and precision during trimming tasks.

The Weed Eater Plus LE is also equipped with a dual-line cutting system, which significantly increases its cutting efficiency. This design allows for a wider cutting path, allowing users to cover more ground in less time. The easy-to-reload spool makes string changes quick and hassle-free, so you can get back to work swiftly.

Another standout technology is the automatic feed system, which ensures that the trimmer's line extends without any manual intervention. This feature guarantees consistent cutting performance, allowing users to focus on their tasks without worrying about line length.

The trimmer’s environmentally friendly features are also worth mentioning. The Weed Eater Plus LE meets strict emission standards, making it a greener choice for lawn maintenance. This is an important consideration for eco-conscious users who want to enjoy a well-maintained yard without negatively impacting the environment.

In summary, the Weed Eater Plus LE is a powerful, efficient, and user-friendly lawn care solution. Its robust engine, ergonomic design, advanced cutting technologies, and eco-friendly features make it a reliable choice for maintaining a beautiful and healthy garden. Users seeking a dependable trimmer that delivers performance and ease of use will find the Weed Eater Plus LE to be an invaluable addition to their gardening arsenal.