HOW to Start Your Unit, Starting a Warm Engine

Engine Choke Lever

ON/STOP

Switch

FULL HALF OFF

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE posi- tion.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

Choke

Lever

flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at OFF CHOKE be- fore releasing the throttle trigger.

NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 5 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to OFF CHOKE.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING INSTRUCTIONS

It is recommended that the engine not be operated for longer than 1 minute at full throttle.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Muffler

Long Pants

Primer Bulb

Heavy Shoes

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE posi- tion and pull the starter rope until the en- gine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably

Cut from your right to your left.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

LE, Plus LE specifications

The Weed Eater Plus LE is a versatile and efficient gardening tool designed for homeowners and gardening enthusiasts who seek an effective solution for weed control and lawn maintenance. This reliable and robust trimmer stands out due to its combination of advanced features, technologies, and user-friendly characteristics.

One of the notable features of the Weed Eater Plus LE is its powerful engine. Equipped with a high-performance gas engine, it offers impressive torque and speed, ensuring that even the toughest weeds and overgrown grass can be managed with ease. This enhanced power provides the user with the confidence that they can tackle any yard challenge, whether it be edging along pathways, trimming around flower beds, or clearing out dense brush.

In addition to its robust engine, the Weed Eater Plus LE incorporates an innovative ergonomic design that allows for comfortable operation. The adjustable handle provides an improved grip, reducing fatigue during extended use. This trimmer features a lightweight construction, which makes it easy to maneuver and handle, resulting in enhanced user control and precision during trimming tasks.

The Weed Eater Plus LE is also equipped with a dual-line cutting system, which significantly increases its cutting efficiency. This design allows for a wider cutting path, allowing users to cover more ground in less time. The easy-to-reload spool makes string changes quick and hassle-free, so you can get back to work swiftly.

Another standout technology is the automatic feed system, which ensures that the trimmer's line extends without any manual intervention. This feature guarantees consistent cutting performance, allowing users to focus on their tasks without worrying about line length.

The trimmer’s environmentally friendly features are also worth mentioning. The Weed Eater Plus LE meets strict emission standards, making it a greener choice for lawn maintenance. This is an important consideration for eco-conscious users who want to enjoy a well-maintained yard without negatively impacting the environment.

In summary, the Weed Eater Plus LE is a powerful, efficient, and user-friendly lawn care solution. Its robust engine, ergonomic design, advanced cutting technologies, and eco-friendly features make it a reliable choice for maintaining a beautiful and healthy garden. Users seeking a dependable trimmer that delivers performance and ease of use will find the Weed Eater Plus LE to be an invaluable addition to their gardening arsenal.