Carburetor Adjustment, Seasonal Storage, Other

Line in Notch

Hub	Line exit hole

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

6.Push the line into the notche, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the line into the the exit holebin the hub as shown in the illustration.

8.Align the notch with the line exit hole.

9.Push spool into hub until it snaps into place. 10.Pull the line extending outside of the hub to

release it from the notch.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed

Screw

Air Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area

where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

LE, Plus LE specifications

The Weed Eater Plus LE is a versatile and efficient gardening tool designed for homeowners and gardening enthusiasts who seek an effective solution for weed control and lawn maintenance. This reliable and robust trimmer stands out due to its combination of advanced features, technologies, and user-friendly characteristics.

One of the notable features of the Weed Eater Plus LE is its powerful engine. Equipped with a high-performance gas engine, it offers impressive torque and speed, ensuring that even the toughest weeds and overgrown grass can be managed with ease. This enhanced power provides the user with the confidence that they can tackle any yard challenge, whether it be edging along pathways, trimming around flower beds, or clearing out dense brush.

In addition to its robust engine, the Weed Eater Plus LE incorporates an innovative ergonomic design that allows for comfortable operation. The adjustable handle provides an improved grip, reducing fatigue during extended use. This trimmer features a lightweight construction, which makes it easy to maneuver and handle, resulting in enhanced user control and precision during trimming tasks.

The Weed Eater Plus LE is also equipped with a dual-line cutting system, which significantly increases its cutting efficiency. This design allows for a wider cutting path, allowing users to cover more ground in less time. The easy-to-reload spool makes string changes quick and hassle-free, so you can get back to work swiftly.

Another standout technology is the automatic feed system, which ensures that the trimmer's line extends without any manual intervention. This feature guarantees consistent cutting performance, allowing users to focus on their tasks without worrying about line length.

The trimmer’s environmentally friendly features are also worth mentioning. The Weed Eater Plus LE meets strict emission standards, making it a greener choice for lawn maintenance. This is an important consideration for eco-conscious users who want to enjoy a well-maintained yard without negatively impacting the environment.

In summary, the Weed Eater Plus LE is a powerful, efficient, and user-friendly lawn care solution. Its robust engine, ergonomic design, advanced cutting technologies, and eco-friendly features make it a reliable choice for maintaining a beautiful and healthy garden. Users seeking a dependable trimmer that delivers performance and ease of use will find the Weed Eater Plus LE to be an invaluable addition to their gardening arsenal.