Panasonic WJ-HD200 manual 8Password Operation PASSWORD OPERATION, 8Keylock Buzzer KEYLOCK BUZZER

8Password Operation (PASSWORD OPERATION)

Enter a five-digit password to protect normal operations from unauthorized access.

Available numerals: From 11111 to 88888

8Keylock Buzzer (KEYLOCK BUZZER)

The buzzer will beep or not when a locked button is pressed.

ON: Enables the buzzer to beep.

OFF: Disables the buzzer to beep.

8Skip Alarm Recall (SKIP ALARM RECALL)

Specify a skipping page number of the alarm log. The alarm log page will jump the specified pages when the JogDial is rotated.

Available skip page: From 1 to 5

8Simultaneous Recording and Playback

(SIMULTANEOUS REC&PLAY)

There may be cases where recording is essential although during playback.

ON: Allows both recording and playback at a time.

OFF: Allows exclusively recording or playback.

Note: The recording rate may be sacrificed in the following cases.

•Recording and playback/FTP access are simultane- ously carried out.

•A multi-split screen is displayed.

•VMD (video motion detection) is enabled.

•A PC accesses the live images via the network.

8Alteration Detection ALTER DETECT

You can enable or disable the recorder to add alter- ation-detection signals in the JPEG data supplied to the network. The default is OFF.

ON: Detects alterations.

OFF: Does not detect.

Note: When set to ON, the data transmission rate on the network will slow down.

8Disk End Mode DISK END MODE

STOP: Stops recording until a mode other than [STOP] is selected.

CONTINUE: Old data is automatically overwritten from the disk start.

8Disk End Buzzer DISK END BUZZER

ON: Enables the buzzer beep at the disk end (remain- ing space = 0 %).

OFF: Disables the buzzer beep.

8Play Priority PLAY PRIORITY

This setting places priority on a specific access point for playing back the image data when access collisions take place.

LOCAL: Places priority on the front panel operations.

NET PLAY: Places priority on the network access.

FTP GET: Places priority on the access to the FTP.

NONE: The latest operation has priority than others.

8Time Adjusting (TIME ADJUSTING)

The internal timer built in the WJ-HD200 is calibrated once a day via the Time Adjust In and Out terminals on the rear panel.

SLAVE: Accepts the calibration signal from the master.

MASTER: Supplies the calibration signal to the slave units at the specific hour a day.

62