Panasonic WJ-HD200 Setup Procedures, Prior To Setup, Turning On the Power, Turning Off the Power

SETUP PROCEDURES

■PRIOR TO SETUP

●Turning On the Power

1.Plug the power cord into the AC outlet.

2.Turn on the power switch on the rear panel. The oper- ate LED lights up. HDD check and system check will be carried out while displaying respective messages.

Power-on recording will start if TIMER has been set to EXT in the SYSTEM SETUP menu.

●Turning Off the Power

1.Press the [STOP] button when playing back, or [REC STOP] button when recording. Confirm that the HDD access indicator has turned off.

2.Turn off the power switch on the rear panel. The oper- ate LED goes off.

3.Press the [REC STOP] button to stop power-on record- ing, if applicable.

				PUSH—	PAUSE SET
HDD	STOP	PLAY	REC	REC STOP
SETUP
/ESC
FULL	ALARM			TIME&DATE
	SERCH			SEARCH
ERROR				ALARM
				RECALL
	PLAY MODE SELECT			Digital Disk Recorder WJ-HD200

	POWER
ON	SIGNAL GND

OFF

ALARM

SUSPEND

OPERATE

RESET

Confirm that	HDD		STOP PLAY	REC	REC STOP
the HDD access
		/ESC
indicator is off.	FULL	SETUP
		SERCH			SEARCH
		ALARM			TIME&DATE
	ERROR					AL
						RE
			PLAY MODE SELECT

4.Hold down the buttons of [LOCK] and [RESET] simulta- neously to suspend alarm inputs. The SUSPEND indica-

tor will light up. This will help your setting operations not to be interrupted by alarm inputs.

				POWER
			ON	SIGNAL GND
ALARM	TIMER	DST	SP
			MU
SUSPEND	REMOTE		OFF
OPERATE
RESET	LOCK	OSD	SEQUE

Note:	Notes:
• Refer to Power-on Procedures in Appendix for	• Do not turn off the power while the HDD access
details.	indicator is on.
	• Do not leave the recorder for a long time. Supply
	AC power to the unit and turn it on to charge up the
	backup battery.

21