●IP Address IP ADDRESS
The default is “192.168.000.010”.
●Netmask NETMASK
The default is “255.255.255.000”.
●Gateway GATEWAY
The default is “192.168.000.001”.
■Switcher Setup SWITCHER SETUP
SWITCHER SETUP
START DISPLAY
MULTI SEL MODE ALL
SEQUENCE SETUPO
CAMERA VIEW SETUPO
Video switcher functions are programmed in this menu setup.
●Start Display START DISPLAY
The image in the selected form will be displayed on the monitor when the recorder is turned on.
Single Image: CH 1 to CH 8
Quad Image:
(including
Multi Image: 9SCREEN (including
Sequence: SPOT SEQ, MULTI SEQ
●Multiscreen Selection MULTI SEL MODE
When the [MULTI SCREEN SEL] button on the front panel is pressed, the monitor display will change as follows depending on the selection.
QUAD ONLY:
ALL:
●Sequence Setup SEQUENCE SETUP
| SEQUENCE SETUP | ||
MULTI | SEQ | SETUPO |
|
SEQUENCE | TIMING | INT | |
AUTO | SKIP |
| ON |
SPOT SEQ SETUPO |
| ||
SEQUENCE | TIMING | INT | |
AUTO | SKIP |
| ON |
1.Move the cursor to SEQ SETUP in the SWITCHER SETUP menu, and press the JogDial.
The SEQ SETUP menu opens.
2.Select either MULTI SEQ SETUP or SPOT SEQ SETUP with the [D] or [C] button, and press the JogDial. The selected menu opens.
●Multiscreen Sequence Setup MULTI SEQ SETUP
Open the QUAD SEQ SETUP menu to program the sequence steps for displaying
| MULTI SEQ SETUP | ||
STEP | → | CAM | SEC |
1 | 2S | ||
2 | → | 2S | |
3 | → | - | 2S |
4 | → | - | 2S |
5 | → | - | 2S |
6 | → | - | 2S |
7 | → | - | 2S |
8 | → | - | 2S |
1.Move the cursor to the desired step using the [D] or [C] button.
2.Select a camera number with the JogDial, and press the JogDial.
The default camera number is identical to the step num- ber.
Available camera: From 1 to 8 individually,
Note: The recorder will skip the step you assigned
3.Select duration for the step with the JogDial, and press the JogDial.
Available duration:
39