■System Information
SYSTEM INFORMATION
SYSTEM INFORMATION
HDD1 HOUR METER 10000H
HDD2 HOUR METER 10000H
HDD CAPACITY | 135.95G | |
DEFAULT→ | SET→ | |
SYSTEM | VERSION | X.XX |
SYSTEM | LOGO |
|
●HDD Hour Meter HDD HOUR METER
The meter shows how many hours each hard disk has been operated in playback, recording and idle. The
●HDD Capacity HDD CAPACITY
The total usable capacity of the
●Default DEFAULT
This enables the recorder to restore all setup data to the default values.
1.Press the JogDial to move the cursor to DEFAULT.
2.When the cursor is on SET→ , press the JogDial again.
3.Select YES or NO with the JogDial, and press the JogDial.
The default is NO.
NO: Current setup data is retained.
YES: Current setup data is reset to the default values.
When all setup data are reset to the default, “SET DONE” is displayed for a few seconds, and it turns to SET→ .
Note: The recorder will restart when the network setup has been changed and the menu is closed.
●System Version SYSTEM VERSION
This line displays the version number of the installed sys- tem software. Version number will help you when updating the software.
●System Log SYSTEM LOG
The system log is listed on the monitor with event number, date, time, and cause.
| SYSTEM LOG (1 OF 10) | ||
NO. | DATE | TIME | CAU |
99 | FEB28.03 | 6:50:06 WR1 | |
98 | FEB28.03 | 5:23:51 HD1 | |
97 | FEB20.03 10:10:23 HD2 | ||
96 | FEB15.03 23:50:42 RV1 | ||
95 | FEB11.03 23:52:10 EMP |
94 | JAN31.03 19:43:32 THE |
93 | JAN30.03 19:50:14 LS1 |
92 | JAN15.03 19:52:54 TM2 |
91 | JAN10.03 10:40:22 TM4 |
90 | JAN01.03 10:50:20 LS1 |
Abbreviation | Cause | Description | |
|
|
| |
THE | Thermal error | Temperature exceeds the | |
operating range. | |||
|
| ||
|
|
| |
WR1 | Writing error | Writing error on HDD | |
| |||
WR2 | |||
|
| ||
|
|
| |
RV1 | HDD automati- | Master HDD | |
|
| ||
| cally removed |
| |
RV2 | Slave HDD | ||
| |||
|
|
| |
HD1 | S.M.A.R.T | Master HDD | |
| detects on |
| |
HD2 | Slave HDD | ||
error on HDD. | |||
|
|
| |
EMP | HDD empty | Warning, HDD is nearing to | |
the end. | |||
|
| ||
|
|
| |
|
| Terminal alarm event was | |
TM* | ALM | logged, but no picture | |
|
| recorded. * = | |
|
|
| |
VM* | VMD | VMD event was logged, but | |
no picture recorded. * = | |||
|
| ||
|
|
| |
LS* | LOSS | Video input loss on channel | |
# (*). * = | |||
|
| ||
|
|
| |
PC* | PC | Alarm has been input from | |
the PC. | |||
|
| ||
|
|
| |
|
| Power disconnection due to | |
POW | Power | electricity failure/trouble has | |
|
| been detected. | |
|
|
| |
ERR | Error | Errors other than shown | |
above | |||
|
| ||
|
|
|
41
