●Recording Mode Setup PROG “1-4” NO. “1-4” SETUP
Parameters for internal timer recording are assigned to each event (NO.
In the SP mode, the field rate and picture quality are vari- able, and can be selected at option in the range of 0.1 to 30 FPS and quality levels from five options respectively. After the recording mode is selected, the available record- ing time is determined and displayed.
Rec Mode | Quality | Audio Record | Note | |
Super Fine | N/A |
| ||
|
|
|
| |
Fine | N/A |
| ||
|
|
|
| |
Normal | N/A |
| ||
|
|
|
| |
Long time | N/A |
| ||
|
|
|
| |
Super Fine | Available |
| ||
|
|
|
| |
Fine | Available |
| ||
|
|
|
| |
Normal | Available |
| ||
|
|
|
| |
Long time | Available |
| ||
|
|
|
| |
Optional setup | Available | Field rate, quality | ||
selected optionally | ||||
|
|
| ||
|
|
|
| |
Optional setup | N/A | Field rate, quality | ||
selected optionally | ||||
|
|
| ||
|
|
|
|
Notes:
•For the recording modes other than SP, suffixed “xxx” in the table will be replaced by a calculated recording time of 24, 48, 72, 96, 120, 170, 180, 240, 480, 960, 1 200, 1 440, 2 160, 2 880, or 8 640 hours. The selected recording mode with the preset rate and quality will determine the suffix.
•Actual recording rate even preset to 30 or 15 FPS may be lessened to 7.5 FPS at worst, while such busy multi task as playback,
•Suffix “xxx” following
1.Move the cursor to MODE, and press the JogDial. The mode area will be highlighted.
2.Select a recording mode using the JogDial, and press the Jogdial. Audio data will be recorded when a mode with hyphen A is selected.
Available Recording Mode: SF, FQ, NQ, EX, SP,
3.When SP or
Available recording rate: From 0.1 to 30 FPS
4.When SP or
Available recording quality: SUPER FINE, FINE, NOR-
MAL, EXTENDED
●Alarm Recording Mode Setup ALM REC MODE
Alarm events arising within the time zone specified by the program will start recording with the preset parameters. Refer to “PROG NO. SETUP” described above in this menu for operating procedures, and available parameters, since they are very much similar.
●Pre-alarm Recording PRE ALM REC
Picture recording will start prior to the alarm activation at the time specified by this setting.
1.Move the cursor to PRE ALARM REC with the [D] or [C] button.
2.Select the desired
The default is 0S.
Available time (seconds): 0S, 1S, 2S, 3S, 4S, and 5S
26