Multi Sequence Setup MULTI SEQUENCE SETUP, 8Time TIME

SNMP System Name

Enter from the keyboard.

SNMP System Location

Enter from the keyboard.

Click the [SET] button if all are adequately set.

The WJ-HD200 will restart, and you will be requested to enter the URL as described earlier in Main Page and Control Panel.

■Switcher Setup SWITCHER SETUP

This window specifies sequence setups only for WJ-HD200. Browser's sequence is set up in the LIVE SEQUENCE SETUP in page 71.

8Common Setup (COMMON SETUP)

Start Display (START DISPLAY)

The image in the selected form will be displayed on the monitor when the unit is turned on.

Single Image: CH 1 – CH 8

Quad Image: QUAD-A (including 1-4), QUAD-B

(including 5-8)

Multi Image: 9-SCREEN (including 1-8)

Sequence: SPOT SEQUENCE, MULTI SEQUENCE

Multi-screen Selection Mode (MULTI SELECT MODE)

When the [MULTI SCREEN SELECT] button on the front panel is pressed, the monitor display will change as fol- lows depending on the selection.

QUAD ONLY: QUAD-A → QUAD-B → QUAD-A

ALL: QUAD-A → QUAD-B → 9-SCREEN → QUAD-A

8Multi-screen Sequence Setup

(MULTI SEQUENCE SETUP)

	Sequence Timing (SEQUENCE TIMING)
	INT: The preset time to the internal timer allows the
	sequence to step forward.
	EXT: SEQ IN signal to the rear panel allows the
66	sequence to step forward.
66

Auto Skip (AUTO SKIP)

ON: The sequence skips the step where no video is input.

OFF: The sequence does not skip the step.

Click the button to open the Multi Sequence Setup window.

8Spot-screen Sequence Setup

(SPOT SEQUENCE SETUP)

Sequence Timing (SEQUENCE TIMING)

INT: The preset time to the internal timer allows the sequence to step forward.

EXT: SEQ IN signal to the rear panel allows the sequence to step forward.

Auto Skip (AUTO SKIP)

ON: The sequence skips the step where no video is input.

OFF: The sequence does not skip the step.

Click the button to open the Spot Sequence Setup window.

8Camera View Setup (CAMERA VIEW SETUP)

Click the button to open the Camera View Setup window.