■INITIALIZING
You can initialize either all disk contents including image data and setup data.
●Initializing All Contents & Setup Data
Warning! The following are irrevocable procedures. We strongly recommend that you copy important pictures from the hard disk.
ON
OFF
ON
1 2 3 4 5 6
MODE
1.Press the [REC STOP] button on [STOP] button to stop recording or playback.
2.Turn off the power.
3.Set MODE switches #1 through 4 on the rear panel as follows:
#1: ON
#2: OFF
#3: OFF
#4: ON
4.Turn on the power.
The disk contents and setup data are initialized.
●Initializing Setup Data
SYSTEM INFORMATION
HDD1 HOUR METER 10000H
HDD2 HOUR METER 10000H
HDD CAPACITY | 135.95G | |
DEFAULT→ | SET→ | |
SYSTEM | VERSION | X.XX |
SYSTEM | LOGO |
|
1.Open the SYSTEM INFORMATION window, then move the cursor to DEFAULT.
2.Press the JogDial to move the cursor to SET.
3.Press the JogDial.
4.Select YES with the JogDial.
YES: Initializing of setup data is enabled.
5.Press the JogDial.
SET DONE appears on the monitor after initializing.
6.Press the [SETUP/ESC] button. The cursor moves to DEFAULT.
7.Hold down the [SETUP/ESC] button for 2 seconds to quit the setup.
Note: After closing the setup menu, the system may automatically restart if any parameter on the net- work has been changed.
NOW FORMATTING HDD
Note: When finished, the monitor will display the cam- era image and status information while the indicator on the selected CAM SEL button is lit. Be sure to carry out the next step, #5.
5.Turn off the power, and return the MODE switches to the previous positions. Then, turn on the recorder.
24