Panasonic WJ-HD200 Keylock Buzzer Setup KEYLOCK BUZZ, Skip Alarm Recall Setup SKIP ALARM RECALL

2.Select either ON or OFF with the JogDial, and press the JogDial.

The default is OFF.

ON: The buttons are password protected. The recorder enters the button lock mode if neither a button nor the JogDial is operated within a period of five min- utes.

OFF: No password protection is applied.

3.Move the cursor to ALL→ or OPERATION→ with the [D] or [C] button.

ALL: Allows both normal operations and setup opera- tions.

OPERATION: Allows only normal operations. Setup operations are not allowed.

4.Press the JogDial.

The preset password appears.

The default is “12345” for both ALL and OPERATION.

<New password setting>

5.Select a digit, rotating the JogDial.

6.Enter a number with the numeric button, and press the JogDial.

The cursor moves one digit to the right.

7.Repeat step 5 and 6 until all digits are entered.

8.Press the [SETUP/ESC] button to confirm the entered password.

Go back to step 3 if you have not yet set the OPERA- TION password.

●Keylock Buzzer Setup KEYLOCK BUZZ

SYSTEM SETUP	(1 OF 2)
PASSWORD LOCK	OFF
ALL→	*****
OPERATION→	*****
KEYLOCK BUZZ	ON
SKIP ALM-RECALL	5PAGE
SIMUL REC&PLAY	ON
ALTER DETECT	OFF
DISK END MODE	CONTINUE
DISK END BUZZ	ON

1.Move the cursor to KEYLOCK BUZZ with the [D] or [C] button.

2.Select either ON or OFF with the JogDial, and press the JogDial.

The default is ON.

ON: Buzzer beeps when unauthorized access takes place.

OFF: Buzzer does not sound.

●Skip Alarm Recall Setup

SKIP ALARM RECALL

Alarm log pages are recalled on the monitor when the JogDial is pressed for 2 seconds. When searching in the log, you may need to skip pages. The displayed page will skip the specified number forward or backward when rotat- ing the JogDial.

SYSTEM SETUP	(1 OF 2)
PASSWORD LOCK	OFF
ALL→	*****
OPERATION→	*****
KEYLOCK BUZZ	ON
SKIP ALM-RECALL	5PAGE
SIMUL REC&PLAY	ON
ALTER DETECT	OFF
DISK END MODE	CONTINUE
DISK END BUZZ	ON

1.Move the cursor to SKIP ALM RECALL with the [D] or [C] button, and press the JogDial.

2.Select the number of skip page with the JogDial, and press the JogDial.

The default is 5 pages.

Available skip page: 5, 10, 15, 20, 25 pages

●Simultaneous Recording & Playback

SIMUL REC & PLAY

This setting specifies whether to allow simultaneous play- back and recording. When the parameter is set to ON, the default of the recording rate will be changed to 15 FPS.

1.Move the cursor to SIMUL REC&PLAY with the [D] or [C] button.

2.Select on or off with the JogDial, and press the Jogdial. The default is ON.

ON: Allows simultaneous recording and playback including remote-access playback and FTP access. The default recording rate is 15 FPS, and as the highest rate is 30 FPS.

OFF: Places priority on recording triggered by pressing the REC button or by an alarm input. Playback including remote-access playback and FTP access will be interrupted if recording starts. The default recording rate is 15 FPS, and as the highest rate is 30 FPS.

Notes:

•A 30 FPS recording will decrease the rate to 15 FPS when playback, remote-access playback, or FTP access is carried out simultaneously with recording.

32