LG Electronics owner manual External AV Source Setup, When connecting with an S-Video cable

Installation

When connecting with an S-Video cable

	VCR
	ANT IN
OUT	S VIDEO ANT OUT
	(R) AUDIO (L)

IN		4
		1
	2
AV OUT
	(MONO)
VIDEO	AUDIO	S-VIDEO	VIDEO	AUDIO
	AV IN 1		COMPONENT IN

1Connect the S-VIDEO output of the VCR to the S- VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input.

2Connect the audio outputs of the VCR to the AUDIO input jacks on the set.

3Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

4Select AV1 input source with using the INPUT button on the remote control.

- If connected to AV IN2, select AV2 input source.

Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.

External AV Source Setup

S-VIDEO

R

AUDIO

L/MONO

VIDEO

1	Connect the AUDIO/VIDEO jacks between TV
	and external equipment. Match the jack colors
	(Video = yellow, Audio Left = white, and Audio
	Right = red).
2	Select AV2 input source with using the INPUT

1

AV IN 2

button on the remote control.

- If connected to AV IN1 input, select AV1 input

source.

Camcorder

Video Game Set

i.e) 32LC2D**

R AUDIO L VIDEO

3 Operate the corresponding external equipment.

Refer to external equipment operating guide.

• This TV finds the connected input sources

automatically for AV1, AV2 and Component 1-

2. It is presumed that RGB and HDMI/DVI

sources are connected.

23