LG Electronics owner manual Troubleshooting Checklist, Operation does not work normally

Reference

Troubleshooting Checklist

	The operation does not work normally.
	• Check to see if there is any object between the product and the remote
The remote control	control causing obstruction.
doesn’t work	• Are batteries installed with correct polarity (+ to +, - to -)?
	• Correct remote operating mode set: TV, VCR etc.?
	• Install new batteries.
Power is suddenly	• Is the sleep timer set?
	• Check the power control settings. Power interrupted
turned off
	• No broadcast on station tuned with Auto off activated.

The video function does not work.

•Check whether the product is turned on.

•Try another channel. The problem may be with the broadcast.

No picture & • Is the power cord inserted into wall power outlet?

No sound • Check your antenna direction and/or location.

•Test the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in.

Picture appears	• This is normal, the image is muted during the product startup process.
slowly after	Please contact your service center, if the picture has not appeared after five
switching on	minutes.
	• Adjust Color in menu option.
No or poor color	• Keep a sufficient distance between the product and the VCR.
	• Try another channel. The problem may be with the broadcast.
or poor picture
	• Are the video cables installed properly?
	• Activate any function to restore the brightness of the picture.
Horizontal/verti-	• Check for local interference such as an electrical appliance or power tool.
cal bars or pic-
ture shaking
Poor reception on	• Station or cable product experiencing problems, tune to another station.
	• Station signal is weak, reorient antenna to receive weaker station.
some channels
	• Check for sources of possible interference.
Lines or streaks	• Check antenna (Change the direction of the antenna).
in pictures

65