Pitney Bowes manual DA300 Basics, Using DA300 With Your Computer, Printer Maintenance

Table of Contents

Chapter 3 - DA300 Basics

Printer Features		3-2
Setting Up a Job		3-4
1.	Set the Separator Gap	3-6
2.	Center the Wireframe under the Material	3-8
3.	Set the Feed Angle	3-9
4.	Position the Feed Fence	3-10
5.	Load Material	3-11
6.	Adjust the Position of the Material Prop	3-12
7.	Adjust the Media Thickness Lever	3-13
8.	Adjust the Exit Rollers	3-14
9.	Print a Test Piece	3-15

Chapter 4 - Using DA300 With Your Computer

Installing the Printer Software	4-2
Installing the Printer Driver/Ed Plus	4-2
Selecting Printer Properties	4-7
Using the Printer Properties Windows	4-8
Selecting the DA300 from a Windows Application	4-17
Envelope DesignerTM Plus	4-18

Chapter 5 - Printer Maintenance

Preventive Maintenance	5-2
Cleaning	5-2
Print Quality Problems	5-2
Exit Rollers	5-3
Sensor	5-3
Floor Assembly and Top Cover	5-3

Chapter 6 - Troubleshooting

Problems and Solutions	6-2
Feed Problems	6-2
Print Quality Problems	6-3
Interface Problems	6-4
Motor Problems	6-5
Barcode Problems	6-5
Other Problems	6-6

ii DA300 Printer Operator Guide