Appendix B • Specifications

Material Specifications (continued)

Material Notes

Envelopes have a flap along the long edge and are processed by the printer non-flap edge first. Enve- lopes may have either a diagonal or straight edge along the envelope flap.

Booklets are defined as media having physical dimen- sions 6 x 9" or larger. Booklets have an opening along their long edge which is covered by a flap with an adhesive seal.

Catalog envelopes have an opening along their short edge which is closed by a flap with an adhesive seal.

Postcards have no folds or bends. The printable side may have a higher surface roughness than the non- printable side.

Self-mailers may be of "C," "Z," or 1/2-folded con- struction. They may not exceed the maximum allow- able thickness as specified on the previous page and must be tabbed per postal regulations.

A catalog may consist of multiple pages bound by adhesive or tabs on the feed edge or at 90 degrees with respect to the feed edge.

Sheet stock may consist of 16 to 28 lb. bond as well as 60 to 80 lb. coated stock. The size and thickness constraints specified above apply.

Material Size and Thickness

 

Width

Height

Thickness

 

 

 

 

Minimum

5" (127mm)

3" (76mm)

.003" (.0762mm)

 

 

 

 

Maximum

12.75" (324mm)

13.5" (343mm)

.062" (1.57mm)

 

 

 

 

Also see the table on the next page.

DA300 Printer Operator Guide

B-9

Page 112
Image 112
Pitney Bowes DA300 manual Appendix B Specifications