Pitney Bowes manual Wire Frame Lock Knob DA300 Printer Operator Guide

DA300 Basics • 3

Setting Up A Job (continued)

3. Set the Feed Angle

The feed angle of the wireframe input stacker depends on the type of material you're running:

•Heavy material—adjust to a low angle

•Standard material—adjust to the center (45 degree angle)

•Light material—adjust to a high angle

To make the adjustment:

1.Loosen the lock knob on the wireframe slide.

2.Move the wireframe up or down as required.

3.Tighten the lock knob to secure the wireframe.

Wire Frame

Lock Knob

DA300 Printer Operator Guide 3-9