Appendix A • Control Panel Menus
1.Heavy Media The only time you need to turn this mode on is when
Mode | you are using long, heavy envelopes. This option |
| increases motor torque. This option is normally OFF. |
To use this option:
1.Press the + or – buttons to scroll through the Setup Menu options until the 1. HEAVY MEDIA LOAD appears on the LCD panel.
2.Press the Enter button to select this option.
3.Press the + or – buttons to select ON or OFF.
4.Press the Enter button to select the desired option.
5.After you have made your selection, press the Menu button several times to back out of the Menu, until the printer displays OFF LINE. Then, press the On Line button to enable the printer.
2. Test Print Head | Before you select this option, make sure that the |
| material is loaded in the printer input area so you can |
| print a test pattern. |
To use this option:
1.Press the + or – buttons to scroll through the Setup Menu options until the 2. TEST PRINT HEAD option appears on the LCD panel.
2.Press the Enter button to select this option.
The LCD will display “Print test pattern?”
DA300 Printer Operator Guide |
