Appendix A • Control Panel Menus
6.Hex Dump Mode The information provided here is for those of our customers who are technically inclined.
The Hex Dump Mode option causes the printer to print all commands and data it receives from the computer in a hexadecimal format. Use this feature to check the integrity of your data. When you enable this option, instead of addresses printing, a HEX dump of the data stream prints on the material. The printer must be attached to a computer in order to use this option.
1.Press the + or – buttons to scroll through the Setup Menu options until 6. HEX DUMP MODE appears on the LCD panel.
2.Press the + or – buttons to select this option which configures the printer to print raw ASCII data.
This is very useful when troubleshooting computer (software) installation problems. See the HEX chart on the next page for review.
DA300 Printer Operator Guide |
