Appendix A • Control Panel Menus
5. Communications | B. Parity |
(continued) | Parity determines the integrity of data that is sent. The |
| choices are (ODD), (EVEN) and (NONE). |
| C. Word Length |
| The choices are (7 DATA BITS) and (8 DATA BITS). |
| D. Line Termination |
| Typical software line termination is CR=CR;LF=LF. If your |
| software is not typical, the line termination can be |
| modified. |
| The menu choices are: |
| (CR=CR;LF=LF) |
| (CR=CR+LF;LF=LF) |
| (CR=CR;LF=CR+LF) |
| (CR=CR+LF;LF=CR+LF) |
To set the Communications menu option:
1.Press the On Line button until the display reads OFF LINE.
2.Press the Menu button for four seconds to display the Setup Menu.
3.Press the + or – buttons to scroll through the Setup Menu options until the 5. COMMUNICATIONS ap- pears on the LCD panel.
4.Press the Enter button to select the options you want. Continue to press menu, the + and - buttons and enter to scroll to and select the options’ next levels.
5.Press the Menu button to back out of the menu until the printer displays “OFF LINE”.
6.Press the On Line button to enable the printer.
DA300 Printer Operator Guide |
