Setting Up the DA300 Printer • 2
Installing and
Removing the
Ink Jet
Cartridge
8. Install the Ink Jet Cartridge
The printer uses an Ink Jet Cartridge for printing. You must install the cartridge before you can print. To begin:
1.With the printer on, press the On Line key until the display reads OFF LINE.
2.Open the back cover of the printer.
3.Press the + key on the control panel to move the carriage to the middle of the printer.
4.Remove the cartridge from its shipping container by peeling the top cover off. Be careful not to touch the copper ribbon.
WARNING! The ink in the cartridge may be harmful if swallowed. Keep new and used cartridges out of reach of children. Discard empty cartridges immediately.
5.Gently remove the tape covering the ink nozzles on the print cartridge, being careful not to touch the copper nozzles.
6.Gently insert the cartridge into the carriage at ap- proximately a 45 degree angle with the green arrow on the cartridge top pointing toward the inside of the printer.
Pitney Bowes DA300 Operator Guide |
