Pitney Bowes manual Feed Fence in Position Pitney Bowes DA300 Operator Guide

Setting Up the DA300 Printer • 2

Assembling the DA300 (continued)

3. Install the Sliding Fence

The DA300 has two fences—a long one and a short one. Use the short fence when printing material smaller than a #10 envelope. Use the long fence for larger material.

Slide the square edge of the sliding fence into the slots on the frame slide as shown below. The next chapter explains how to set the fence to the width of the material you're running.

Feed Fence in Position

Pitney Bowes DA300 Operator Guide 2-9