– 60 –

Specifications

Amplifier

Output Power (IEC 268-3/DIN):
30 watts per channel, min. RMS, both channels driven
into 6 ohms at 1 kHz, with no more than 0.9% total
harmonic distortion
Audio input sensitivity/Impedance (at 1 kHz)
Analog input:
TAPE: 500 mV/47 kohms (at “INPUT Level 1”)
195 mV/47 kohms (at “INPUT Level 2”)
Digital input:
AUX: Optical
Signal wave length: 660 nm
Input level: –23 dBm to –15 dBm
(With the built-in sampling rate
converter, corresponding to 32 kHz/44.1
kHz/48 kHz)
Audio output level/Impedance (at 1 kHz)
TAPE: 160 mV/3.9 kohms
Speakers/Impedance: 6 – 16 ohms

Tuner

FM tuning range: 87.50 — 108.00 MHz
AM (MW/LW) tuning range:
MW: 522 — 1,629 kHz
LW: 144 — 288 kHz

CD player

CD Capacity: 3 CDs
Dynamic range: 92 dB
Signal-to-noise ratio: 100 dB
Wow and flutter: Immeasurable

MD recorder

Audio playing system: MiniDisc digital audio system
Recording system: Magneto-optical overwrite system
Reading system: Non-contact, semiconductor laser
pickup (λ=780 nm)
Error correction system:
CIRC (Cross Interleave Reed-
Solomon Code)
Sampling frequency: 44.1 kHz
(With sampling rate converter for
recording — 32 kHz/44.1 kHz/
48 kHz)
Audio compression system:
ATRAC (Adaptive TRansform
Acoustic Coding)

General

Power requirement: AC 230V , 50 Hz
Power consumption: 95 watts (at operation)
1.6 watts (on standby: with Power
Saving On)
14 watts (on standby: with Power
Saving Off)
Dimensions (approx.): 215 x 180 x 346 mm (W/H/D)
(81/2 x 71/8 x 135/8 in.)
Mass (approx.): 6.9 kg (15.3 lbs)

Supplied accessories

See page 6.
Design and specifications are subject to change without
notice.
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
EN55-60.CA-MXS5RMD[B]/f 99.9.14, 1:55 AM60