JVC CA-MXS5RMD 11

– 11 –

Before operating the unit any further, first set the clock

built in this unit, then some other basic settings.

Turning On the Power

When you press the play button (#/8) for a particular

source or the source selecting buttons such as FM/AM and

TAPE/AUX, the unit automatically turns on (and starts

playback if the source is ready).

• Pressing SET on the unit also turns on the unit.

To turn on the unit without playing, press so that the

STANDBY/ON lamp on the unit lights green.

To turn off the unit (on standby), press again so that

the STANDBY/ON lamp lights red.

A little power is always consumed even while the unit is in

standby mode.

To switch off the power supply completely, unplug the

AC power cord from the AC outlet.

You can change the opening or ending screen

illustrated above

Instead of showing the above opening or ending screen, you can

make your original screens. To make and store your original

screens, see “Creating Your Own Opening and Ending Screens” on

page 49.

When you unplug the AC power cord or if a power

failure occurs

The clock is reset to “0:00” right away, while the tuner preset

stations and other settings will be erased in a few days.

Setting the Clock

You can set the clock whether the unit is turned on or in

standby mode.

On the unit ONLY:

1

Press CLOCK/TIMER.

The hour digit in the main display starts flashing.

2

Push and hold the joy control rightward (¢ ) or

leftward (4 ) to adjust the hour, then press SET.

• If you want to correct the hour after pressing SET,

press CANCEL. The hour digit starts flashing again.

3

Push and hold the joy control rightward (¢ ) or

leftward (4 ) to adjust the minute, then press

SET.

“ADJUST OK!” appears in the main display, and the

built-in clock starts.

To adjust the clock again

Once you have adjusted the clock, you need to press

CLOCK/TIMER repeatedly until the CLOCK SET screen

appears in the main display (the hour digit starts flashing).

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set

the clock again.

EN10-16.CA-MXS5RMD[B]/f 99.9.14, 1:52 AM11

Contents

Main COMPACT DIGITAL AUDIO INSTRUCTIONS CA-MXS5RMD LVT0354-001A [B] COMPACT COMPONENT MD SYSTEM Warnings, Cautions and Others G-1 Caution: Proper Ventilation G-2 CLASS 1 LASER PRODUCT 1 Introduction About This Manual Precautions Installation Power sources Contents 3 Location of the Buttons and Controls 4 Front Panel Display window 5 Remote Control 6 Getting Started FM antenna Unpacking Connecting Antennas 1 Page 8 Connecting Other Equipment To connect a cassette deck To connect audio equipment with an optical digital output terminal 9 To start the display demonstration manually Putting the Batteries into the Remote Control 1 3 Page 11 Turning On the Power Setting the Clock To adjust the clock again 12 How these settings work Normal screens Changing the Main Display Screen 13 Changing the Display Brightness and Contrast To change the brightness To change the contrast To store the selected main display screen in backup memory Page 15 Adjusting the Volume To turn down the volume level temporarily Reinforcing the Bass Sound Selecting the Sources and Starting Play 16 Creating Your Own Sound Mode MANUAL Mode To use your own sound mode Selecting the Sound Modes Page 18 Tuning in a Station To change the FM reception mode Presetting Stations 19 Tuning in a Preset Station Receiving FM Stations with RDS 20 Changing the RDS Information Searching for Programs by PTY Codes (PTY Search) 21 Switching to a Program Type of Your Choice Temporarily 22 Alarm function Test function 23 Description of the PTY codes: Page 25 Loading CDs Playing Back the Entire Discs Continuous Play Basic CD Operations To exchange CDs during playback of another 26 To stop playback for a moment To locate a particular point in a track during play To go to another track To go to another track directly using the number buttons 27 To check the program contents To modify the program Playing at Random Random Play Repeating Tracks or CDs Repeat Play Page 29 Playing Back the Entire MD Normal Play Basic MD Operations To stop playback for a moment To locate a particular point in a track during play 30 Programing the Playing Order of the Tracks Program Play To check the program contents To modify the program 31 Playing at Random Random Play Repeating Tracks Repeat Play Prohibiting Disc Ejection Disc Lock Page 33 Before You Start Recording About the track marks To avoid erasing important recordings 34 Recording Any Sound Source Standard Recording To select the sound input level 35 First Track Recording Recording CDs Synchronized Recording 36 Recording FM/AM (MW/LW) Broadcasts Monaural Recording and Stereo Recording Recording the External Equipment Sound Synchronized Recording and Stereo Recording 37 Page 39 Introducing MD Editing Functions EN38-43.CA-MXS5RMD[B]/f 99.9.14, 1:54 AM39 a c a c 40 DIVIDE Function 41 MOVE Function JOIN Function Page Page Page 45 Assigning Titles to an MD 46 47 Changing the Title 48 Page Page 51 Using Recording Timer How Recording Timer actually works 52 To turn on or off Recording Timer after its setting is done Using Daily Timer How Daily Timer actually works 53 54 To turn on or off Daily Timer after its setting is done Using Sleep Timer How Sleep Timer actually works To sleep with the Sleep Timer and wake up with the Daily Timer Maintenance General Notes Handling CDs Handling MDs 56 Additional Information 57 Sound Skip Guard Memory 58 MD Messages 59 Troubleshooting 60 Specifications Amplifier Tuner CD player MD recorder