JVC CA-MXS5RMD manual Using Recording Timer, How Recording Timer actually works

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using these timers, you need to set the clock built in the unit. (See page 11.)

Using Recording Timer

With Recording Timer, you can make an unattended recording.

•You can set Recording Timer whether the unit is turned on or off.

•To correct a mis-entry any time during the setting process, press CANCEL.

To cancel the setting any time during process, press

CLOCK/TIMER.

How Recording Timer actually works

The unit automatically turns on, turns off the volume, and starts recording on the MD when the timer-on time comes. Then, when the timer-off time comes, the unit automatically turns off (stands by).

Recording Timer works only once, but the timer settings remain stored in memory until you reset them or disconnect the AC power cord.

On the unit ONLY:

1 Press CLOCK/TIMER repeatedly until “REC TIMER SET UP” appears in the main display.

The REC indicator starts flashing on the display.

• Each time you press the button, the timer mode changes as follows:

	DAILY TIMER	DAILY TIMER
		SET UP
Canceled		REC TIMER
	CLOCK SET	REC TIMER
		SET UP

2 Push the joy control rightward (¢ ) or leftward (4 ) to set the hour of the timer-on time, then press SET.

3 Push the joy control rightward (¢ ) or leftward (4 ) to set the minute of the timer-on time, then press SET.

4 Push the joy control rightward (¢ ) or leftward (4 ) to set the hour of the timer-off time, then press SET.

5 Push the joy control rightward (¢ ) or leftward (4 ) to set the minute of the timer-off time, then press SET.

6 Push the joy control rightward (¢ ) or leftward (4 ) to select the source.

• The source changes as follows:

FM AM

AUX DIGITAL TAPE

FM: Tunes into an FM station.

=Select a preset station (see below).

AM: Tunes into an AM (MW/LW) station.

=Select a preset station (see below).

TAPE*: Selects “TAPE” as the source.

=Make the external equipment ready for playback.

AUX DIGITAL*: Selects “AUX DIGITAL” as the source.

=Make the external digital equipment ready for playback.

*To operate these equipment with the Recording Timer, they also need to have the timer function.

7 If you have selected “FM” or “ AM” as the source in

the above step, select a preset number.

Push the joy control downward (1 ) or upward (` ) to select a preset station, then press SET.

•If you press SET without selecting a preset station, the last received station will be tuned in when the timer recording starts.

If you have selected “T APE” or “ AUX DIGITAL” as the source in the above step, simply press SET.

The REC indicator stops flashing, and remains lit.

– 51 –