– 46 –
6
Input a character.
• Ex. When entering “H”
1) Push the joy control horizontally (4 /
¢ ) and vertically (1 / ¡ ) to until
“H” is selected.
2) Press SET.
The selected character is entered, and the character
entry position moves to the next.
• To move the character entry position while
entering a title, select 3 for moving it rightward
and 2 for moving it leftward in the main display,
then press SET.
Each time you press SET, the character entry
position moves.
• To enter a blank, select a blank in the main
display, then press SET.
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
7
Repeat steps 5 and 6 to enter other characters.
• The main display can only show 8 characters at a
time. If you enter the 9th character, the first character
disappears, and so on.
8
Press ENTER/DEMO to finish the current title
entry.
“EDITING” appears for a while, then the unit enters
title entry mode again.
• You can assign another title by repeating steps 3 to 8.
9
Press TITLE (or ENTER/DEMO again) to exit from
the title entry mode.
10
Press 0 for the MD recorder to eject the MD.
“WRITING” appears while the editing you have
made is being recorded on the MD.
You can assign titles during play or recording
•During play:
Entering a track title
The MD recorder repeats playback of the current track until you
press ENTER/DEMO in step 8 above. When you press ENTER/
DEMO, the next track will be played.
Entering a disc title
The MD recorder repeats playback of all tracks of the MD until
you press ENTER/DEMO in step 8 above. When you press
ENTER/DEMO, the MD recorder enters the track title entry
mode.
•During recording:
Entering a track title
The MD recorder continues recording even after you press
ENTER/DEMO in step 8 above. When you press ENTER/
DEMO, a track title is assigned to the track where you have
started the title entry.
•During CD Synchronized Recording and the First Track
Recording:
You can assign the disc title, and 15 track titles one after another
as recording goes on. The track titles you have entered are
automatically assigned to the tracks recorded on the MD in
sequential order. If you enter 16th track title or more, they are
ignored.
If “NO OPERATION!” appears
You have tried to use the remote control while entering a title using
the buttons on the unit. Use the buttons on the unit only.
Blanks
Continued
Character entry position
EN44-49.CA-MXS5RMD[B]/f 99.9.14, 1:54 AM46