JVC THD60 manual Select a source you want to set the audio input for, For VIDEO1, For VIDEO2

Setting the audio input for external components

Set the audio input of the external component for “VIDEO1” or “VIDEO2.”

1

Item Current setting

2Select a source you want to set the audio input for.

AIN.1	For “VIDEO1”
AIN.2	For “VIDEO2”

3Select an appropriate audio input according to

the audio connection. ( 8, 9)

2CH	For connection via the
	AUDIO IN jacks
5.1CH	For connection via the
	AUDIO MULTI IN jacks
COAX	For connection via the
	COAXIAL jack
OPT	For connection via the
	OPTICAL terminal

Selectable settings for the each source:

–“VIDEO1”: 5.1CH*1, COAX*2, and OPT*2

–“VIDEO2”: 2CH, COAX*2, and OPT*2

Make the audio input setting for both “VIDEO1” and “VIDEO2.”

*1When the speaker position mode is set to “S.SPK F,” “5.1CH” is not selectable.

*2It is not possible to select the same audio input setting for “VIDEO1” and “VIDEO2.” For example, when “COAX” is assigned to “VIDEO1,” it is not selectable for “VIDEO2.”

See page 12 for button locations.

Scanning mode setting

Select the scanning mode according to the type of TV and connection method.

To use the progressive mode, connect the TV to the HDMI MONITOR OUT terminal or COMPONENT

jacks*1. ( 7)

1Select “DVD” or “USB” as the source.

( 11)

2 «Hold

3Select an appropriate scanning mode, then confirm the selection.

Select		Confirm
480I*2		To see the picture in interlaced mode.
1080I*3
480P		To see the picture in progressive
720P*	3	mode.
AUTO*3		The System automatically emits the
		video signal to get the best picture
		quality on your TV.

You can get better picture quality in the following orders:

–1080I > 720P

–480P > 480I

When the picture is not shown correctly, change

the scanning mode to the interlaced mode. When the TV is connected through S-VIDEO or VIDEO jack, the scanning mode setting has no effect.

*1Activate progressive mode only when your TV supports progressive video signals.

*2Selectable only when the TV is connected via COMPONENT

jacks. ( 8)

*3Selectable only when the TV is connected via HDMI

MONITOR OUT terminal. ( 7)

14