JVC THD60 manual Audio menu AUDIO, Speaker setting menu SPK.SETTING, Other setting menu OTHERS

Underlined items are the initial settings.

Audio menu (AUDIO)

DOWN MIX	This menu is available only when the speaker position mode is set to “S.SPK F” (	12).
	Select the audio signal output to the TV connected to the HDMI MONITOR OUT terminal.
	DOLBY SURROUND: For the TV equipped with Dolby Pro Logic decoder
	STEREO: For ordinary TV
D. RANGE	You can enjoy powerful audio even at low volume level while playing Dolby Digital software.
COMPRESSION	AUTO: Select this to apply the compression only to the multi-channel software (except 1-
	channel and 2-channel sources).
	ON: Select this to always apply the compression.
HDMI AUDIO OUT	This setting is effective only for the source “DVD” or “USB.”
	Select whether the System emits the audio signal from the HDMI MONITOR OUT terminal (ON)
	or not (OFF).

•For selecting whether the external component emits the audio signal through its HDMI terminal, make the setting on the external component.

Speaker setting menu (SPK.SETTING)

SPK.SETTING menu is available only when the speaker position mode is set to “S.SPK R” (12).

LEVEL	Adjust the output level of each speaker while monitoring the test tone.
	FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
	SPEAKER: Select the speaker, then adjust the output level.
	TEST TONE: Turns on/off the test tone.
DELAY	Adjust the delay time of the speakers.	Ex.:
	FRONT LEFT/RIGHT SPEAKER,		Subwoofer
	CENTER SPEAKER, SURROUND				Center
	RIGHT/LEFT SPEAKER: Select the				1 ms
									Front right
	speaker, then adjust the distance from								0 ms
	the listening position to the speakers.		Front left
	• 1 ms increase (or decrease) in delay time			0 ms
	corresponds to about 30 cm (1 ft) decrease						2.4 m
							(8 ft)			3.0 m
	(or increase) in distance.									(10 ft)
						2.1 m
	• Set to 0 ms for the furthest speaker from					(7 ft)		2.7 m
	your position as the basis for the delay time							(9 ft)
	setting.
								Surround right
			Surround left
				2 ms				2 ms
SUBWOOFER	Make the subwoofer setting.
	LEVEL: Adjust the output level of the subwoofer.
	CROSS OVER: Select an appropriate crossover frequency according to the size of the
	cone speaker unit built into the small speaker connected.
	120Hz: Select this when the cone speaker unit size is 8 cm (3-3/16 inches) or more.
	150Hz: Select this when the cone speaker unit size is between 6 cm (2-3/8 inches)
	and 8 cm (3-3/16 inches).
	200Hz: Select this when the cone speaker unit size is 5 cm (2 inches) or less.

Other setting menu (OTHERS)

RESUME	Activate (ON) or deactivate (OFF) the resume function.
ON SCREEN GUIDE	Activate (ON) or deactivate (OFF) the on-screen guide icons.
DivX REGISTRATION	The System has its own Registration Code for DivX playback. You can confirm the code of
	your System.
	• Once you play back a disc created by using the Registration Code, the System’s code is
	overwritten by a totally different new one for copyright protection purposes.

24