Attaching the base plates—required for the front speakers (SP-THD6F) only

Do not connect the power cord until all other connections have been made.

Speaker layout B

Select “S.SPK F” as the speaker position mode for

This side should face the front.

Connect the speaker cord.

Route the speaker cord.

this layout. ( 12)

Subwoofer (SW)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround left (SL)

Surround right (SR)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front left

 

(L)

 

 

 

 

 

 

 

Center (C)

Front right (R)

Place the surround speakers close to the center speaker.

Use the supplied screws (M5 x 85 mm/3-3/8 inches) to attach the base plate to the speaker.

Speaker layout

You can enjoy surround sound by placing the speakers as illustrated (Speaker layout A or B).

Do not place any obstacle near the left side of the subwoofer to make its speaker unit, which is installed in the left of its enclosure, work properly.

Speaker layout A

Select “S.SPK R” as the speaker position mode for

this layout. ( 12)

 

Center (C)

Front left (L)

Front right (R)

Subwoofer

 

(SW)

 

Surround left

Surround right

(SL)

(SR)

To obtain the best possible surround sound from this System, place all the speakers except the subwoofer at the same distance from the listening position. If it is impossible, adjust the delay time from DELAY

menu. ( 24)

It is recommended to place the surround speakers horizontally (see below).

When placing the surround speakers horizontally

Lay the surround speakers horizontally so that the JVC logos are positioned as illustrated below.

Ex.:

LR

TV

SLSR

You can turn the JVC logos to make them legible.

Attaching the feet to the surround speakers When placing the surround speakers horizontally, attach the feet to the bottom of the speakers as illustrated.

Peel off

6

Page 49
Image 49
JVC THD60 manual Speaker layout B, When placing the surround speakers horizontally