JVC THD60 manual Speaker layout B, Speaker layout a

Attaching the base plates—required for the SP- THD6F only

Do not connect the power cord until all other connections have been made.

Speaker layout B

Select “S.SPK F” as the speaker position mode for

This side should face the front.

Connect the speaker cord.

Route the speaker cord.

this layout. ( 12)

					Subwoofer (SW)
Surround left (SL)			Surround right (SR)
Front left	(L)	Center	(C)	Front		right (R)

Place the surround speakers close to the center speaker.

Use the supplied screws (M5 x 85 mm/3-3/8 inches) to attach the base plate to the speaker.

Speaker layout

You can enjoy surround sound by placing the speakers as illustrated (Speaker layout A or B).

Speaker layout A

Select “S.SPK R” as the speaker position mode for

this layout. ( 12)

	Center (C)
Front left (L)	Front right (R)
	Subwoofer
	(SW)

It is recommended to place the surround speakers horizontally (see below).

When placing the speakers horizontally

Lay the speakers horizontally so that the JVC logos are positioned as illustrated below.

Ex.:

TV

LR

SLSR

TH-D50/TH-D5/TH-D4 only: you can also lay the front

speakers as illustrated below.

TV

Surround left	Surround right
(SL)	(SR)

To obtain the best possible surround sound from this System, place all the speakers except the subwoofer at the same distance from the listening position. If it is impossible, adjust the delay time from DELAY

menu. ( 24)

L SL SR R

TH-D60: Do not lay down the front speakers horizontally.

You can turn the JVC logos to make them legible.

Attaching the feet

When placing the speakers horizontally, attach the feet to the bottom of the speakers as illustrated.

Peel off

6