JVC THD60 Disc/file playback, Basic playback, Playing back a disc, 1Select “DVD” as the source

Disc/file playback

The following icons show the available disc/file types for the target function:

Initial settings

Make the following settings before playing back discs/ files.

•Scanning mode ( 14)

•MONITOR TYPE ( 23)

•ON SCREEN LANGUAGE ( 23)

Set the remote control mode before operation.

For disc playback

For playback of a file on a USB mass storage class device

Operating the touch sensor panel

You can operate the playback control buttons on the center unit simply by touching them.

When you touch any one of these buttons, it lights briefly in blue.

If a still picture is displayed for about 5 minutes, the System automatically dims the screen (screen saver function). You can deactivate the screen

saver function. ( 23)

When several types of files (music, picture or movie) are recorded on a disc or device, select

the file type you want to play. ( 23)

For messages and icons appearing on the display, see “Messages and icons shown on the TV during

disc/file playback” ( 31).

Basic playback

Playing back a disc

1Select “DVD” as the source. ( 11)

2 (On the center unit)

3Place a disc on the tray.

Label side up	When placing an 8 cm
	(3-3/16 inches) disc

4Start playback.

•JPEG: Slide-show playback starts.

•MP3/WMA/WAV: The file control display appears

on the TV. ( 22)

Playing back a file on a USB mass storage class device

1Connect a USB mass storage class device while the System is turned off.

USB mass storage class device

2Turn on the System, then select “USB” as the

source. ( 11)

Playback starts automatically.

Press 3 (play button) to start playback if the file is not played back automatically.

•JPEG: Slide-show playback starts.

•MP3/WMA/WAV: The file control display appears

on the TV. ( 22)

15