Do not connect the power cord until all other connections have been made.
Connection using the component video jacks
| Green |
From component | Blue |
video input | |
TV |
|
Component video |
|
cord (not supplied) | Red |
Audio connection | |
Connecting a digital component | |
DBS (Direct | Digital coaxial cable |
(not supplied) | |
Broadcasting |
|
Satellite) |
|
tuner, etc. | Digital optical cable |
| |
| (not supplied) |
AFrom digital coaxial output B From digital optical output
For the BNC connection, use a plug adapter (not supplied).
Select the appropriate audio input setting (“OPT” or
“COAX”) before playing back. (
14)
Connection using the S-video or composite video jack
Composite video cord
(supplied)
TVor
Connecting an analog component
RCA pin plug cord (not supplied)
DVD player, |
etc. |
A From composite video input | Align the |
B From | 5 marks. |
Connecting external components
,
AFrom center channel audio output
BFrom front left/right channel audio outputs C From subwoofer output
D From surround left/right channel audio outputs
Connection for “VIDEO1”
Select “VIDEO1” as the source (
11) for playing a component connected as follows.
Video connection
| HDMI cable |
DVD player, | (not supplied) |
etc. | From HDMI video output |
|
No sound signal comes into HDMI VIDEO 1 IN terminal. Make audio connection to listen to the sound (see the right column).
To listen to the sound from AUDIO MULTI IN jacks, perform the following procedure:
–Place the speakers by following “Speaker layout
A” (
6).
–Select “S.SPK R” as the speaker position mode.
(
12)
Select “5.1CH” as the audio input setting before
playing back. (
14)
8
