– 8 –

Connecting Other Equipment

You can connect the following equipment to this unit:
• Cassette deck — used as a playback and recording
device. By using the cassette deck, you can record any
source played back on this unit.
• Audio equipment with an optical digital output terminal
— used only as a digital playback device.
When you connect and use these equipment, refer also to
the manuals supplied with them.
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
Continued

To connect a cassette deck

To input (REC)
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
the TAPE OUT (REC) jacks — For recording on the
cassette deck.
• Between the audio output jacks on the cassette deck and
the TAPE IN (PLAY) jacks — For playing a tape.
To output (PLAY)
Cassette deck
To optical digital
output

To connect audio equipment with an optical digital

output terminal

Connect between the optical digital output terminal on the
other equipment and the AUX terminal.
Protective cap
Before connecting the other equipment,
remove the protective cap from the terminal.
Audio equipment with an
optical digital output
EN01-09.CA-MXS5RMD[B]/f 99.9.14, 1:52 AM8