Panasonic manual Main Menu WJ-HD200MAIN MENU, Timer Recording Setup TIMER REC

■Main Menu WJ-HD200 MAIN MENU

The main menu is located in the top of the menu tree from where every menu window starts.

WJ-HD200 MAIN MENU

TIMER	OFF
O
REC SETUPO
EXT REC SETUPO

DISPLAY SETUPO

SYSTEM SETUPO

ALARM SETUPO

COMMUNICATION SETUPO

SWITCHER SETUPO

SYSTEM INFORMATIONO

1.Hold down the [SETUP/ESC] button for 2 seconds. The main menu appears.

2.Select a setup menu you wish to program using the [D] or [C] button, and press the [SET] (JogDial).

The selected setup menu opens. The following pages will detail each setup menu.

■Timer Recording Setup TIMER REC

This menu assigns a timer to start recording by use of an external timer or the internal timer. When the internal timer (INT) is set, there are four programs assignable to the weekly and/or daily schedule. Each program can contain up to four events along with start and end time, recording- mode. Alarm recording will be carried out when an alarm operates during the scheduled time zone.

When the external timer (EXT) is set and the connected timer switch turns on to supply power, the recorder will start power-on recording.

1.Select a timer mode using the JogDial.

OFF: Does not use any timer, and manual recording is available.

INT: Carries out internal timer recording according to the program.

EXT: Carries out power-on recording.

2.Press the JogDial to validate the selection. When INT is selected, the TIMER REC menu opens.

TIMER REC

PROGRAM

SUNDAY PROG1O

MONDAY

TUESDAY

WEDNESDAY

THURSDAY

FRIDAY

SATURDAY

DAILY

3.Move the cursor to the desired line using the [D] or [C ] button.

4.Select a program number from among PROGRAM 1 to PROGRAM 4 using the JogDial, and press the JogDial. The PROGRAM “1-4” SETUP menu opens.

●Program “1-4” Setup PROGRAM “1- 4” SETUP

		PROG1 SETUP
NO. START END					MODE
1→	8:00		12:20		SETO
2→ 13:00			15:00		SETO
3→		:		:
4→		:		:

1.Select the event number with the [D] or [C] button, and press the JogDial. The cursor moves to the START position.

After this operation, the [D] and [C] buttons move the cursor to the right and left.

2.Select a start time (START) using the JogDIal, and press the [D] button to move the next position.

Available START time: From 0:00 to 23:59 in the 24- hour system.

3.Select an end time (END) in the same way as above and press the [D] button to move the cursor to the MODE position.

Available END time: From 0:01 to 24:00 in the 24-hour system.

Notes: There are some restrictions on programming.

•An event, except the first event (NO 1), can be pro- grammed only if the immediately preceding event has been set up.

•A start time should be late than the end time of the immediately previous event.

•An end time should be late than the start time of the event.

•An end time 24:00 will cancel all the following events.

4.Press the JogDial while the cursor is on SETO to open the event programming menu.

25