Panasonic WJ-HD200 Operating Procedures, Controlling Video Inputs & Monitors, On the Spot Monitor

OPERATING PROCEDURES

CONTROLLING VIDEO INPUTS & MONITORS

Operations on the front panel can control video inputs on the spot monitor or multi-screen monitor.

■On the Spot Monitor

●Selecting the Spot Monitor

1.Press the [SPOT/MULTI] button to turn the LED in the button on. The spot monitor is ready to be operated.

SPOT

MULTI

2.Follow the descriptions below for each monitoring mode on the spot monitor.

●Viewing a Single Live Spot

A selected live image is displayed on the spot monitor until a new input selection is made.

1. Press a desired numeric button from among 1 – 8.

CAMERA SELECT

1	2	3	4
5	6	7	8

■On the Multi-screen Monitor

●Selecting the Multi-screen Monitor

1.Press the [SPOT/MULTI] button to turn the LED in the button off. The multi-screen monitor is ready to be oper- ated.

SPOT

MULTI

2.Follow the descriptions below for each monitoring mode on the multi-screen monitor.

●Viewing a Single Live

The multi-screen monitor can display a single live spot image.

Operating procedures are the same as that of “ On the Spot Monitor” except selecting the multi-screen monitor.

In this condition, the spot monitor will display the same image as the multi-screen monitor.

●Zooming a Single Live

A single live or playback image on the multi-screen monitor can be zoomed.

1.Display the desired single live or playback image on the multi-screen monitor pressing the [ZOOM] button appropriate times if necessary.

The selected image appears on the monitor.

2. Press another numeric button to select a new input.

MULTISCREEN

SELECT

ZOOM

2.Hold down the [ZOOM] button for 2 seconds to enlarge the image.

MULTISCREEN

SELECT

ZOOM

42